Filter
Top Products
Network Setup Menu
48
Network Notification:
The Network Notification feature sends an alert from
the System to the remote client software (up to 5
instances of the Software Client). This feature is
designed to work on the Local Area Network.
1. Run IPCONFIG on the PC with the installed
Software Client to get the IP Address.
2. Set the IP Address location of the Lorex Client
Software (The PC to receive the event notification)
on the Network Notification screen.
These sites are part of the NETWORK section.
The Lorex Client Software (PCs) configured here can receive real-time information about events that
occur on the system (when the software application is running). When ON/OFF is set to ON, events will
be sent using the NETWORK notification.
SITE Setup
Configure the System Name and System ID in this
menu. Use the Virtual Keyboard to assign a name to
the System.