LOREX Technology L19LD800-Series DVR User Manual


 
Record Menu
38
Record Menu
The recording menu controls the settings for each camera for basic and scheduled recording.
SCHEDULE – See below.
RESOLUTION – Set the size of the
recorded images to 704 x 480, 704 x 240, or
352 x 240.
PRE-EVENT – See below.
CH1~CH8 VIDEO – Turns the recording for
each channel to ON or OFF.
CH1~CH4 AUDIO – Turns the audio
recording ON or OFF for channels 1~4 only.
SPEED C/E – Set the recording frames per
second (FPS) when in Continuous
Recording or in Event recording (for each
channel)
QUALITY C/E – Set the recording quality
(Low, Normal, High or Best) when in
Continuous or Event recording (for each channel).
Schedule Setup
Set the daily recording schedule for each channel.
NOTE: Pressing the FN key on the front panel will
apply the specific settings to all channels.
Set each block in the 24hour grid to C (Continuous),
E (Event) or + (Both Continuous and Event).
Pre-Event Setup
Set the pre-recording time for each channel. Pre-recording will add
video to the beginning of the recorded data when an event is
detected.
CH1~CH8– Turns the pre-recording for each channel to ON
or OFF.
DWELL TIME – Set the dwell time between 5~30 seconds.