Filter
Top Products
System Log & Messages – Appendix #8
71
Pop-Up Messages
Classification Message Description
PLEASE WAIT… Waiting for internal operation.
DETECTING USB DEVICE… Detecting the USB device.
SNAPSHOT IS EXECUTING. PLEASE
WAIT…
Waiting for the Snap Shot operation.
Displays the status of an
instantaneous operation
(disappeared automatically
after completion)
TO APPLY NEW S/W, YOU SHOULD
RESTART THE SYSTEM.
NOW REBOOTING…
The system restarts after succeeding in the System
Update.
THE DISK IS FULL !! NO OVERWRITE
MODE.
The DISK was full
THE DISK IS ALMOST FULL, NO
OVERWRITE MODE.
The DISK is almost full
OLD FILESYSTEM FOUND IN
INTERNAL1. FORMAT NEEDED FOR
RECORDING.
The system found the DISK a different version of
file system was applied.
OTHER SYSTEM'S DISK FOUND IN
INTERNAL1, FORMAT NEEDED FOR
RECORDING.
The system found the DISK a different file system
was applied.
NEW DISK FOUND IN INTERNAL1.
FORMAT NEEDED FOR RECORD.
The system found a new DISK
BACKUP/CLIP-COPY COMPLETED. The Backup or Clip-Copy was completed.
BACKUP/CLIP-COPY STOPPED. The Backup or Clip-Copy was stopped.
BACKUP/CLIP-COPY FAILED. The Backup or Clip-Copy was failed.
FORMAT FAILED. CHECK DISK
STATUS AND TRY AGAIN.
The DISK Format was failed.
UPDATE FAILED. The System Update failed.
Displays the status of event,
error and operation
(disappeared in case only
user press the OK button)
MIRROR HALTED! CHECK YOUR
USB DEVICE OR USB CABLE.
Mirror was halted while mirroring.
BOOKMARK FAILED. Bookmark failed.
THE CURRENT PLAYBACK TIME IS
BOOKMARKED.
Bookmark succeeded.
ABC FILE SAVED. Snapshot succeeded. (in case that filename is
ABC)
INVALID PRESET NUMBER ! The DVR user tried to use wrong preset number in
the PTZ Setup mode.
USB DEVICE ATTACHED. The system found a new USB device.
USB DEVICE DETACHED. The USB device was extracted from the system.
ACCESS DENIED User had no access authority.
THIS CAMERA IS NOT PTZ CAMERA. User tried to use PTZ function for the channel not
to be defined as a PTZ.
CHECK YOUR PASSWORD AND TRY
AGAIN.
User entered a wrong password.
NO INPUT ! User needed to enter numeric.
INVALID RANGE! ENTER CORRECT
RANGE.
A selected time range is wrong
NO RECORD DATA. The system can't find record data in the Bookmark
Search mode.
SITE1 ADDRESS IS AN INVALID
FORMAT.
User entered a wrong site address in the
Notification Setup mode.
SCREEN ON TIME AND SCREEN OFF
TIME IS SAME.
The value of Screen On and Off is same in the
Screen Setup mode.
RS232 PORT IS BEING USED BY
KEYBOARD. SET UP THE RS232
PORT.
User tried to change from Remote Keyboard to
PTZ in the Serial Setup mode.
RS232 PORT IS BEING USED BY
POS. SET UP THE RS233 PORT.
User tried to change from POS to PTZ in the Serial
Setup mode.
PTZ MODE IS BEING USED BY
CLIENT.
User tried to handle same PTZ while the remote
client controls a PTZ camera.
MAIN MENU IS BEING USED BY
CLIENT.
User tried to enter the setup mode during the
remote setup
NO INPUT FILE NAME! ENTER THE
FILE NAME.
User tried to start without filename in the Clip-Copy
mode.
TOO BIG FILE SIZE. LIMITTED TO
2GB.
The file size selected by user was bigger than 2GB
in the Clip-Copy mode
THE SAME FILE IS IN YOUR
STORAGE. ENTER DIFFERENT FILE
NAME.
User entered the filename already existed in the
storage in the Clip-Copy mode.
Displays the status of user
handle, device detection
and instantaneous
operation.
(disappeared automatically
after 2 seconds)
SAME ID EXISTED. User tried to select the ID already existed in the
PTZ Setup mode.
Classification Message Description
Displays the status of user
handle, device detection
INVALID DOMAIN NAME. ENTER
CORRECT DOMAIN NAME.
User entered an invalid domain name in the DDNS
Setup mode.