Filter
Top Products
Network Setup Menu
45
Network Setup Menu
Controls the network settings for:
• LAN – Network settings for the System
• SERIAL – Controls for serial devices (i.e.
POS input).
• DDNS – Settings for remote access over
the internet
• NOTIFICATIONS – Automatic email or
network notification when an event occurs
• SITE – Controls the site specific settings.
LAN Setup
Controls for the System network settings
• TYPE – Set the network setting detection
to Manual or DHCP. If set to DHCP, the
network information will be assigned by
the network router.
• TCPIP – Setup for the system’s network
settings. IF set to DHCP, the settings will
not be accessible. If set to Manual, the
settings will need to be manually entered:
o IP Address
o Subnet Mask
o Gateway
o DNS Server – Is set in the system
by default to point to the Lorex
DDNS server. Do not change this
unless advised by a technical
support representative.
o Port – Setup for the System Ports for remote connection.
NOTE: These ports will need to be changed if using multiple
systems at one location.