Magnavox MBP512OF/F7 Blu-ray Player User Manual


 
20
2 audio CD: “CD-DA” will be displayed.
JPEG: Current Disc, SD Memory
Card, or folder name will be
displayed.
3 Track /
Folder / File
list:
Track / Folder / File list in the
original order
4 Programmed
list :
Track / File list in the
programmed order
5 Cumulative playback time of all tracks in the
programmed list (audio CD only)
6 Playback status
7 Current page / Total page number
8 Operation
guide:
Press [RED] to go to the
previous page in the track /
file list.
Press [GREEN] to go to the next
page in the track / file list.
Press [BLUE] to go to the
previous page in the
programmed list.
Press [YELLOW] to go to the
next page in the programmed
list.
For JPEG files, use [K/L] to select a folder, then
press [OK] first, and then use [K/L] to select a
file, then press [OK].
Press [CLEAR] to erase the last file of the
program.
• Use [K/L] to select “All Clear” at the bottom
of the list to erase all the tracks / files in the
program.
The programmed tracks / files is displayed in
the right hand screen.
• Use [s/B] to go back / forward between the
hierarchy of folders.
3. Press [B (play)] to start program playback.
• The program playback will start.
To exit from the program playback mode:
• Press [RETURN] in stop mode.
Note
During program playback, press [C (stop)]
once to set the resume point, and then press
[B (play)] to resume program playback from
where [C (stop)] was pressed (audio CD) or
from beginning of the file where [C (stop)] was
pressed (JPEG).
During program playback, press [C (stop)] twice
to display the program screen. To go back to the
normal program playback, press [RETURN] to
exit from the program screen, then press
[B (play)].
Up to 99 tracks / files can be entered.
To repeat the current track / file in the program,
press [REPEAT] repeatedly until “
Track”
appears during playback. To repeat the entire
program, press [REPEAT] repeatedly until
All” appears during playback.
Playback from a desired track / file and random
playback are not available during program
playback.
Press [MODE] to switch to the random playback
mode.
The program will be cleared when;
- the unit is turned into the standby mode.
- the media mode is switched to the other
mode.
- the disc / card is removed. (as for “Disc”
mode, just opening the disc tray will clear the
program info.)
Random Playback
This function shuffles the playback order of tracks
/ files.
1. In stop mode, press [MODE] twice.
1 / 3
Total 1 : 13 : 29Random
CD_DA
Page Down
1 0:36
1:14
0:45
0:50
0:53
0:20
0:54
2
3
4
5
6
7
- - / 16
1 62 3 4 5
1 audio CD: Track information
JPEG: File information
2 audio CD: “CD-DA” will be displayed.
JPEG: Current Disc, SD Memory
Card, or folder name will be
displayed.
3 Track / File
list:
Track / File list in the original
order will be displayed.
4 Operation
guide:
Press [RED] to go to the
previous page in the track /
file list.
Press [GREEN] to go to the next
page in the track / file list.
5 Total playback time of all tracks (audio CD
only)
6 Playback status
2. Press [B (play)] to start random playback.
To exit from the random playback mode:
• Press [MODE] in stop mode.
Note
During the random playback, press [C (stop)]
once to set the resume point, and then press
[B (play)] to resume random playback from
where [C (stop)] was pressed (audio CD) or
from beginning of the file where [C (stop)] was
pressed (JPEG).