Filter
Top Products
32
Parental
Ratings control allows you to set a limit, which prevents your children from viewing inappropriate
materials. Playback will be stopped if the ratings exceed the levels you set, and it will require you to enter
a password before playing back the disc.
Parental
BD Rating Level All
DVD Rating Level All
Password Change
1. Use [K/L] to select , then press [OK].
2. Use [the Number buttons] to enter your 4-digit password.
For the first time use: Use [the Number buttons] to enter any 4-digit number (except for 4737), then
press [OK]. That number will be used as the password from the second time. Record your password in
case you forget it.
• If you forget the password, enter [4], [7], [3], [7]. The password will be cleared and rating level will be
set to “All”.
• While you input the password, press [CLEAR] to clear the number, then re-enter the password.
3. Proceed to A – C
A) BD Rating Level
1) Use [K/L] to select “BD Rating Level”, then press [OK].
2) Use [K/L] to select your desired option, then press [OK].
“All”: To release the limitation.
“Age Setting”: To set the age limitation.
• After selecting “Age Setting”, use [the Number buttons] to enter the age from 0 – 254.
(e.g. for age 15, press [0], [1], [5])
3) Press [SETUP] to exit.
B) DVD Rating Level
1) Use [K/L] to select “DVD Rating Level”, then press [OK].
2) Use [K/L] to select your desired level, then press [OK].
3) Press [SETUP] to exit.
RATING EXPLANATIONS
All: Parental Control is inactive; all discs can played back.
8 [Adult] : DVD software of any grades (adult / general / children) can be played back.
7 [NC-17] : No one under 18 admitted.
6 [R] : Restricted; under 18 requires accompanying parent or adult guardian.
5 [PGR] : Parental guidance recommended.
4 [PG-13] : Unsuitable for children under 13.
3 [PG] : Parental guidance suggested.
2 [G] : General audience.
1 [Kid Safe] : Suitable for children.
C) Password Change
1) Use [K/L] to select “Password Change”, then press [OK].
2) Enter a new 4-digit password, then press [OK].
3) Press [SETUP] to exit.