Filter
Top Products
34
Setting items Options/Descriptions
Network
Connection
• Refer to page
36 for more
information.
Connection
Test
Perform a network connection
test. After you change IP address
or DNS setting, always perform
this test.
Network
Selection
Wired* Easy* If you select “Easy”, connection
test will automatically start.
Custom IP Address
Setting
Auto(DHCP)* Set the IP address. In most cases,
you can connect to the Internet
without making any changes to
the default setting.
Manual IP Address
Subnet Mask
Default
Gateway
DNS Setting Auto(DHCP)* Set the DNS setting. In most
cases, you can connect to the
Internet without making any
changes to the default setting.
Manual Primary
DNS
Secondary
DNS
Proxy
Setting
Do Not Use* Set the proxy server. In most
cases, you can connect to the
Internet without using proxy
server.
Use Proxy Address
Proxy Port
Connection
Speed
Auto* Set the connection speed. In
most cases, you can connect to
the Internet without making any
changes to the default setting.
10BASE Half
10BASE Full
100BASE Half
100BASE Full
BD-Live
Setting
Allow* You can restrict Internet access
when BD-Live functions are used.
Limited Allow
Prohibit
MAC Address You can check the MAC address.
Wireless Wireless
Router
Find wireless
network
WEP/WPA Authentication Set up the connection to the
wireless router and enter the
WEP/WPA key required for
wireless network connection.
Manually
enter your
SSID
Wireless Router Status You can check the current status
of the wireless router setting.
Advanced
Settings
Easy* If you select “Easy”, connection
test will automatically start.
Custom IP Address Setting Set the IP address. In most cases,
you can connect to the Internet
without making any changes to
the default setting.
DNS Setting Set the DNS setting. In most
cases, you can connect to the
Internet without making any
changes to the default setting.
Proxy Setting Set the proxy server. In most
cases, you can connect to the
Internet without using proxy
server.
BD-Live Setting You can restrict Internet access
when BD-Live functions are used.
MAC Address You can check the MAC address.
Disable No* Deactivate the network
connection.
Yes
Disclaimer Displays the network service
disclaimer.