Filter
Top Products
31
Menu Setting items Descriptions
Channel Level
Tests or sets the volume for each
speaker.
Test Tone:
“Test Tone” is the test tone which
can be output from the speakers
so you can adjust the volume for
each speaker.
Select “Off” to deactivate “Test
Tone”. Select “Manual”, then press
[OK] to manually set the volume for
the desired speaker.
Select “Auto”, then press [OK] to
automatically output the test tone
from each speaker.
Front Lch If you have selected “Manual” in
“Test Tone”, select the desired
speaker to set and adjust the
volume for the selected speaker. If
you select “Auto” in “Test Tone”, test
tone will automatically be output
in order. Adjust the volume of the
speaker that outputs the test tone.
Center
Subwoofer
Front Rch
Surround Rch
Surround Back Rch
Surround Back Lch
Surround Lch
Default Select “Default”, then press [OK] to
reset “Channel Level” setting to the
default.
Delay Time
This is a parameter for optimizing
the timing at which the sound
outputs from the speakers
according to the distance from
the listening position.
Distance Set the desired measure system.
This measure system will be used
for “Delay Time” setting.
Press [OK] to switch the settings.
Front Select the distance from the
listening position to the speaker to
get the ideal delay time.
Center
Surround
Surround Back
Default Select “Default”, then press [OK] to
reset “Delay Time” setting to the
default.
• For “Speaker Size” setting, the settings of each speaker size may be adjusted automatically
corresponding to each setting. (e.g. If “Front” is set to “Small”, you cannot set “Center”, “Surround”, and
“Surround Back” to “Large”.)
• For “Delay Time”, the difference between the value of the “Front”, “Surround” and “Surround Back”
setting cannot exceed 15 ft (4.5m), and the difference between the value of the “Front” and “Center”
setting cannot exceed 5 ft (1.5m).
• For “Delay Time”, the value of the “Center”, “Surround” and “Surround Back” setting cannot exceed the
value of the “Front” setting.
• For “Delay Time”, the setting of “Center”, “Surround” and “Surround Back” will be changed automatically
to the setting value of the “Front”. (e.g. If the “Front” is set to 60ft (18m), the setting of “Center”,
“Surround” and “Surround Back” will be changed to 60ft (18m) as well.)