Magnavox VRU344AT VCR User Manual


 
10
Setting the Clock
There are two ways to set the clock. With
manual clock setting, you tell the VCR
the current time. The VCR then adjusts
the time accordingly. With automatic
clock setting, the VCR gets the current
time from your local PBS station. It
keeps track of the time by constantly
referring to the time broadcasted by your
PBS station.
Follow the instructions under either man-
ual clock setting or automatic clock set-
ting (page 11) to set the VCR's clock.
Make sure:
eThe VCR is hooked up and turned on,
and channels are programmed into the
VCR's memory.
The VCR is in VCR position (see pages
13, 15-16).
You make each entry within 60 seconds
of the previous entry (otherwise, the
VCR will exit Clock Set mode and you
will have to start over).
You have correctly chosen TV or
CABLE TV at the TUNER SET UP
menu.
Manual Clock Setting
1
Press the MENU button to bring up
the main menu display.
? SELECT PUSH NO.SHOWN_
1 PROGRAM |
2 VCRSETUP /
3 TUNER SET UP |
4 SET CLOCK l
/
,€
_,,_ ENDPUSH F.XIT J
2
Press the Number 4 button to select
SET CLOCK.
UTO CLOCK [OFF]|
I 2 SET MANUALCLOCK /
I 3 DAYLIGHTSVG TIMEIOFFJ|
/ CABLEBOXUSERS /
{ SET CLOCKMANUALLY /
\ TO SELECTPUSHNO.SHOWN )
END PUSH EXIT J
3
If ON appears to the right of AUTO
CLOCK, press the Number 1 button.
OFF will appear to the right of AUTO
CLOCK.
4
Press the Number 2 button to select
SET MANUAL CLOCK.
END PUSH _ff
5
Daylight-Saving Time
Selection
Follow the steps below to program the
VCR so its clock will automatically
move forward one hour in April and turn
back one hour in October.
1
Press two Number buttons for the
hour(s) and two Number buttons for
the minute(s). Then press 1 for AM
or 2 for PM. For example, for 2:15
PM, press 02, 15, 2.
Enter a 0 before a single digit num-
ber.
2;
Entries that do not match the VCR's
internal calendar will cause a ques-
tion mark (?) to appear on-screen.
To make corrections, press the
CLEAR button until the space for
the number you want to correct is
flashing. Then enter the correct
number.
IT_ TIME0_,15 PM
CORRECTPUSHCLEAR }
ENDPUSH EXIT
6
Press two Number buttons for the
month, two Number buttons for the
day, and two Number buttons for the
year. For example, for July 1, 1996,
press 07, 01, 96. The day of the
week will appear automatically.
CORRECTPUSHCLEAR ]
ENDPUSHEXIT _'
7
Press the STATUS/EXIT button to
start the clock. The screen will return
to the program you were watching.
Press the MENU button to bring up
the main menu display.
SELECT PUSHNO.SH_
PROGRAM |
VCR SET UP /
TUNERSET UP |
SET CLOCK J
_'_0 END PUSH EXIT /
Press the Number 4 button to select
SET CLOCK.
(flA _CLocK
UTO CLOCK {OFF] I
I 2sETMANUALCLOCK l
I 3 DA_GHT SVG_ME [OFF] I
i CABLEBOXUSERS /
l SETCLOCKMANUALLY/
TOSELECT PUSHNO. SHOWN )
_0 END PUSH EXE
Press the Number 3 button so that ON
appears to the right of DAYLIGHT
SVG TIME.
UTO CLOCK [OF
I 2 SET MANUALCLOCK /
I 3 DAYLIGHTSVGTIME {ON]|
/CABLE BOX USERS ]
[SET CLOCKMANUALLY /
\ TO SELECTPUSH_. SHOWN /
_TO END PUSH EXIT J
4
Press the STATUS!EXIT button to
exit.