Filter
Top Products
6
Hooking Up Your VCR
The basic VCR/TV connection - antenna/cable to VCR to TV - is shown below. For other hookups, including those that use
cable converter/descrambler boxes, see pages 36 - 39.
1
Disconnect the antenna or
cable from your T¥.
Back of TV
\\\ fl # //// . .
\_///// _ Indoor Antenna (example only)
IOutdoor Antenna _
m" L"t n
Antenna Jack
2
Connect the antenna/cable
to your VCR.
\\\ D // IIII , ,
_ ANT(enna). IN(put) Jack
__B- ........... OUT(pu,,
Jack
3
Connect your VCR to your
TV using the black RF
coaxiol cable (supplied).
Make sure both the TV and
the VCR are plugged in.
4
Select channel 3 or 4.
Set the CH3/CH4 switch on the back of the
VCR to CH3 or CH4, whichever channel is
not used or least used in your area. To oper-
ate your VCR with your TV, set the TV to the
same channel. For example, when playing a
tape, if the CH3/CH4 switch is set to CH3,
the TV should be on channel 3.
Antenna or Cable
I Back of VCR
Wall Outlet
Back of TV
ANT(enna).
/ IN(put) Jack (example only)
i_-_ _'//OUT(put) Jack
_coaxiaicable I _ \
(supplied) J cVomHbFi/_JnaHtiFon
Antenna Jack
Wall
Outlet
TV
/ \
-°
IIOO01109BOIlOg e'"o
I Switch