Filter
Top Products
.
Before Using Your VCF
Putting Batteries
in the Remote Control
1
Remove the battery compartment
lid on the bottom of the remote con-
trol by pressing in the tab, then lift-
ing the lid.
2
Place two AAA batteries inside the
battery compartment with their
polarities (+ and - ends) aligned as
indicated.
3
Replace the battery compartment
lid.
i The remote control and its batteries are supplied.
Do not mix alkaline and manganese batteries.
Do not mix old and new batteries.
Using the Remote Control
VCR
Point the remote
control at the
VCR's remote sen-
sor, making sure to
stay within the
angle shown.
i To select channels
: 100 - 125 using the
• number buttons,
: first press the 100
i button, then press
: the last two digits
• of the desired
• channel. For
: example, for chart-
: nel 117, press the
: 100 button, 1, 7.
: The 100 button
: will work only
! when selecting
" cable channels
• and when CABLE
" TV has been
: selected at the
! Tuner Setup
: menu.
J
VCR
Button
Do not put objects
between the remote
control and the VCR.
_®'_
o c:::D O
00000
O0 O0
To select channels
1 - 9 using the
number buttons, first
press 0, then press
the desired channel
number. For exam-
ple, for channel 6,
press 0, 6.
100 Button
Press the VCR but-
ton on the remote
control before
pressing other VCR
operation buttons
on the remote con-
troL
Remote Control
Erase Protectnon
Video cassette tapes have record
tabs to ensure that recordings are
not accidentally erased.
To record again, cover
the hole with cello-
x_. phane tape.
To prevent accidental
erasure, break offthe
tab witha screwdfive_
Types of Video Cassette Tapes and Tape Speeds
Tape Speed Maximum Record/Playback Time
Type T160 T120 T60
SP 2 hrs.
2 hrs. 1 hr.
(Standard Play) 40 mins.
LP 5 hrs.
4 hrs. 2 hrs.
(Long Play) 20 mins.
SLP
8 hrs. 6 hrs. 3 hrs.
(Super Long Play)
]
In this VCR, use only tapes with the _ mark. ]
The chart at the left shows the recording/playback time for
l
three types of video cassettes (T160, T120, T60). There
are three playback speeds: SP, LP, and SLP. During pla)
back, the VCR selects the tape speed automatically.
When recording, you can change the speed using the
(Tape) SPEED button (see page 9).
Make sure any light adhesive stick-on notes are removed
from the video cassette tape before putting it in the VCR.
Removable labels like these can jam the VCR.