26
Rerecording (Tape Duplication)
The instructions on this page show you
how to copy tapes. The illustration uses
two VCRs just like yours. Different VCRs
may operate differently.
NOTE: Unauthorized recording of copy-
righted television programs, video tapes, or
other materials may infringe on the rights
of copyright owners and violate copyright
laws.
1
VCR 1 will play your tape. Insert a prere-
corded tape in VCR 1. If the tape does not
have a record tab, playback begins. If this
happens, press the STOP/EJECT button on
VCR 1 once.
2
VCR 2 will record your tape. Insert a
blank tape in VCR 2. Make sure the VCR
2 power is on and VCR 2 is in VCR posi-
tion.
3
Turn the TVon and set it to channel 3 or 4,
whichever channel the CH3/CH4 switch on
VCR 2 is set to.
4
Point the remot8 control at VCR 2. Press
the Number buttons 0, 0. A/V IN will
appear on-screen.
5
Point the remote control at VCR 2. Use
the (Tape) SPEED button to select SP, LP
or SLP.
6
Press the PLAY button on VCR 1 and the
REC(ord)/OTR button on VCR 2 at the
same time.
: Connections
e
VCR 1 VCR 2
Playing VCR Recording VCR
(back view) (back view)
AUDIO and
VIDEO
OUT(put) Jacks
From AUDIO OUT to AUDIO IN
/
From VIDEO OUT to VIDEO IN
TV
on channel
3 or4
AUDIO"" OUT(put)
and VIDEO Jack
IN(put)
Jacks
e
e
Audio and video cables are not included.
Operation
1
Put a prerecorded
tape in VCR 1.
4
Point the remote con-
trol at VCR 2 and
press the Number but-
tons 0, 0.
Use the (Tape)
SPEED button to
select the recording
speed of VCR 2.
VCR 1
o _ o
_0000
Select channel 3 or
4 at the TV.
6
Press the PLAY
button on VCR 1 -
and the
REC(ord)/OTR
button on VCR 2 at
the same time.
Remote
Control
Put a blank
tape in VCR 2.
I
: TV
