Magnavox VRU344AT VCR User Manual


 
9
Recordin
I Turn the TV on and set
it to channel 3 or 4.
3
Make sure the
VCR light is on. If
the light is not on,
press the VCR/TV
button once.
To stop recording,
press the STOP
button.
Press the
REC(ord)/OTR
btttton once to
start recording.
7
TV and VCR
O c==:90
0000
O0 O0
Insert a tape.
Press the PAUSE/STILL
button once to pause
recording. To start
recording again, press the
PAUSE/STILL button
m
again or press the
-_REC(ord)/OTR button.
5
Press the (Tape)
SPEED button to
Remote Control
Use the CHANNEL
(Up/Down) buttons
or the Number but-
tons to select the
channel you want to
record.
If the REC(ord)/OTR button is pressed while a tape without a record tab is
in the VCR, the VCR will eject the tape and PROTECTED CASSETTE
CANNOT RECORD will flash on-screen.
Other recording options are on pages 18 - 26.
° You can change the tape speed while the VCR is recording, but some distor-
tion will appear on the tape.
Read and follow the steps below to record
: a television program.
il
Turn the TV on and set it to channel 3 or
i 4, whichever the CH3/CH4 switch on the
back of the VCR is set to.
,&
Insert a tape with its record tab intact (see
page five) in the VCR. The power will
: come on, and the Cassette-Inside light
i wil3aPpear"
! If the VCR light on the display panel of
i the VCR appears, go to step 4. If the
: VCR light does not appear, press the
: VCR/TV button once.
i4
i Press the (Tape) SPEED button on the
: remote control until the desired tape
i speed (see page five) appears on the TV
: screen. The tape speed will disappear
: from the screen after about five seconds.
5
hNCHArNNEL (Up/Down)buttons
buttons to select the chan-
be recorded.
Press the REC(ord)/OTR button once to
start recording. The REC light will
: appear.
i7
i To pause the recording (for example, dur-
ing commercials), press the PAUSE/
STILL button once. The REC light will
: flash.
: To start recording again, press the
• i REC(ord)/OTR button or the PAUSE/
STILL button again. The REC light will
appear again.
i8
i To stop recording, press the STOP button.