Filter
Top Products
8
Playing
• :,.] ::
Read and follow the steps below to play a
tape.
1
Turn the TV on and set it to channel 3 or 4,
whichever the CH3/CH4 switch on the
back of the VCR is set to.
2
Insert a tape in the VCR. The power will
come on. The VCR will place itself in
VCR position automatically (the VCR light
and the Cassette-Inside light on the display
panel of the VCR will appear). If the tape's
record tab has been removed, playback will
start automatically.
3
If playback does not start automatically,
press the PLAY button to start playback.
4
Press the STOP button on the remote con-
trol or the STOP/EJECT button on the VCR
once to stop playback.
Press the REW(ind)/SEARCH button on
the remote control or the REW(ind) button
on the VCR to rewind the tape.
6
Press the EJECT button on the remote con-
trol or the STOP/EJECT button on the VCR
again to remove the tape.
e
TV and VCR
1
Turn the TV on and set
it to channel 3 or 4.
1
Insert _
a tape.
I
4
Press the
REW(ind)/SEARCH
button r the
REW(ind) button to
rewind the tape.
)-
----I
Press the
EJECT button
once or the
STOP/EJECT
button again to
remove the
@%
svA_
O _ O
00000
-0 0 0 0
3
To start
playback,
press the
PLAY
button.
4
To stop play-
back, press
the STOP but-
ton or the
STOP/EJECT
button once.
tape. Remote Control
• If the tape you want to play is already in the VCR, make sure the VCR
power is on, then press the PLAY button.
• Other playback options and features are on pages 29 - 32.