Filter
Top Products
PAGE 104
MS300 User’s Manual
Packing Instructions:
In the event it is necessary
to repack the equipment for
shipment, the equipment must be
packed exactly as shown below.
It is very important that the four
plastic feet are attached to the
bottom of the equipment. This
will ensure the proper equipment
location on the bottom pad. Failure
to do this will result in shipping
damage.
Use the original shipping carton
and interior parts only if they are
all in good serviceable condition.
If a shipping carton or any of
the interior part(s) are needed,
please call or write Customer
Service Department of McIntosh
Laboratory. Please see the Part
List for the correct part numbers.
Quantity Part Number Description
1 033838 Shipping carton only
4 033837 End cap
1 033836 Inside carton only
1 033725 Top pad
1 034194 Bottom pad
1 034837 Inner carton pad
4 017218 Plastic foot
4 100159 #10-32 x 3/4” screw
4 104083 #10-7/16” Flat washer