Filter
Top Products
PAGE 92
MS300 User’s Manual
Restarting the System
There are two ways of manually performing a full restart or reboot
of the MS300 system, one using the front panel power button and the
other using the Restart System menu.
Follow these steps to restart the system using the front panel
Power Button:
1. Press and hold the power button for 4 seconds.
2. When the LED on the front panel begins to flash, release the
power button.
3. When the LED on the front panel glows solid RED (standby
mode), the MS300 is ready to use.
4. Press and release the Power button to turn on the MS300.
Follow these steps to restart the system using Utilities menu:
1. Press the SETUP key on the remote to display the Setup
menu.
2. Select the
UTILITIES menu.
3. Select the RESTART SYSTEM
menu.
4. Confirm that you want to restart the system and select the
RESTART button.
5. When the LED on the front panel glows solid RED (standby
mode), the MS300 is ready to use.
6. Press and release the Power button to turn on the MS300.
USER PREFERENCES