Filter
Top Products
PAGE 21
MS300 User’s Manual
• Kenwood DV-5900M and DV-5050M CD/DVD Changers (CDs only)
• Pioneer DV-F07 CD/DVD changer (CDs only)
Note: All three changers must be from the same manufacturer. For example, you can not use 1 Sony and 2 Kenwood
changers at the same time. Also, you can not mix Sony CD and Sony CD/DVD changers.
Connecting Sony DVP-CX777ES CD/DVD Changers (CDs Only)
The MS300 requires that you connect each changer to the back panel using audio and control cables.
Follow these steps to connect your Sony CD/DVD changers to your MS300:
1. An RS-232 serial null modem cable with female DB-9 connectors on each end is required for connecting a
Sony CD/DVD Changer.
2. Connect one end of the RS-232 serial cable into Communication Port number 1, on the back of your MS300.
3. Connect the other end of the RS-232 serial cable into the “RS-232C” port on the back of your changer.
4. Locate the stereo RCA audio patch cable.
5. Connect one end of the RCA audio cable into the Analog In jacks number 1 on the back of your MS300
6. Connect the other end of the RCA audio cable into the Analog Line Out jacks on the back of your changer.
MUSIC ON THE MS300