Filter
Top Products
PAGE 61
MS300 User’s Manual
RECORDING FROM AN EXTERNAL SOURCE
The MS300 also allows you to record from the external inputs to a blank CD. This allows you to record live
performances or any other analog source to a blank CD which can then be played on almost any standard CD Player..
Follow these steps to record direct to CD from an external source:
1. Press the MUSIC key to make sure you are in the Music source
mode.
2. Press the RECORD key to display the Music Record Options menu.
3. Select the RECORD EXT INPUTS DIRECT TO CD
menu item.
4. The External Record Options screen will be displayed showing the
default information for the recording you are about to make. You
can use these default settings or edit them. The default recording
length is 30 minutes. Enter a different number to increase or
decrease the recording time.
5. When you are finished editing the default settings, press the
RECORD key again to start recording from the external analog
inputs to the internal hard drive.
6. The MS300 will record from the external analog inputs to a
temporary “image” recorded on its internal hard drive.
7. When the recording time elapses and the recording is complete,
the MS300 will ask you to insert a blank CD.
8. Insert a blank CD-R or CD-RW disc and close the CD tray by
pressing the Eject button on the front panel.
9. The Music Record Progress – CD Write screen now appears as the
CD image is written to the blank CD.
10. When the CD is complete, the new disc you created will be ejected.
Remove the disc and close the CD tray.
If the MS300 detects that no audio was actually recorded, it will return
to the Music Guide without asking you to insert a blank CD. Check your
cables and make sure you have audio connected to the analog inputs on the
back of your MS300.
CREATING CDs