PAGE 23
MS300 User’s Manual
• If you have more than one changer, repeat these steps to connect the additional changers to S-Link and audio
jack 2.
• For the best audio quality, you should also connect digital optical or coax audio cables between your changers
and the MS300.
Connecting Kenwood CD/DVD Changers (CDs Only)
The MS300 requires that you connect each changer to the back panel using audio and control cables.
Follow these steps to connect your Kenwood DVD/CD changers to your MS300:
1. Locate the RS-232 serial cable that came with your Kenwood changer. This is the black cable with female
DB-9 connectors on each end.
2. Connect one end of the RS-232 serial cable into Communication Port number 1, on the back of your MS300.
3. Connect the other end of the RS-232 serial cable into the “RS-232C” port on the back of your changer.
4. Locate the stereo RCA audio patch cable.
5. Connect one end of the RCA audio cable into the Analog In jacks number 1 on the back of your MS300
6. Connect the other end of the RCA audio cable into the Analog Line Out jacks on the back of your changer.
• If you have more than one changer, repeat these steps to connect the additional changers to communications
ports and audio jacks 2 and 3 respectively.
• For the best audio quality, you should also connect digital optical audio or coax cables between your changers
MUSIC ON THE MS300
