PAGE 72
MS300 User’s Manual
USER PREFERENCES
CONFIGURING A MS300 SERVER
Every MS300 capable of server functions is automatically enabled to serve MP3 and FLAC audio whenever it is
plugged in and properly configured for your network.
It is recommended that you give each of your MS300 servers a unique name that describes it’s location using the
SERVER SETTINGS screen which can be accessed from Setup/Network /Server Settings. Names like “LivingRoom”,
“HomeTheater”, “MyMusicServer” are all good examples.
Note: Do not use spaces in the MS300 Server Name.
Optionally, you can assign a password for web access to the MS300. This password is independent from the Parental
Controls password and is used to limit access to MS300’s web server from any standard web browser on your
network. If a password is entered here, the user will be asked to enter it when connecting to the MS300 from their PC.
This password is provided to protect access to your MS300 through the standard HTTP port 80 on your subnet.
CONFIGURING A MS300 CLIENT
Networking
Each MS300 client must be on the same network as the server. This document will assume that you have properly
connected your MS300 client to the same network as your MS300 server. Please refer to the HomeNetworkingPrimer
support document on the Escient web site for more information about home networking.
Server Selection
MS300 clients will automatically select the first server it sees on the network and connect to it upon startup. If you
have more than one server on your network, you can manually select a different server using the Server Connection
screen which can be accessed from Setup/Internet Configuration/Server Connection.
The Server Connection screen displays a list of MS300 Servers found on your network by their default or user defined
“MS300 Name”.
Once you select a server and save your selection, press MUSIC to view the Music Guide on the client. In a few
moments, the Music Guide will display the contents of the MS300 server. You can then select and play anything from
the Music Guide just as you would from a single MS300.