Mitsubishi Electronics X100 Projection Television User Manual


 
26
NORMAL menu
The following adjustments to the projected image can be done in this menu.
CONTRAST BRIGHTNESS TINT COLOR
GAMMA CORRECTION
R / G / B
RESET
0
R / G / B USER
0 0 0
HELP
NORMAL
ENHANCED
POINTER
AUDIO
OPTION
QUIT
Adjusts the picture contrast. The contrast becomes higher as the number increases.
If you wish to select the color, select R/G/B and
press the ENTER button. (The R/G/B setting
menu will be displayed.) To exit the R/G/B setting
menu, select RETURN and press the ENTER
button. To switch back to the default condition,
select RESET and press the ENTER button.
Adjusts image brightness. The image becomes brighter as the number increases.
If you wish to select the color, select R / G / B and
press the ENTER button. (The R / G/ B setting
menu will be displayed.) To exit the R/G/B set-
ting menu, select RETURN and press the EN-
TER button. To switch back to the default condi-
tion, select RESET and press the ENTER button.
Adjusts the color intensity of the image (only
when NTSC or 4.43 NTSC is selected).
Adjusts the color balance in the image. The color balance of the image shifts green
as the number increases and shifts to purple as the number decreases (only when
NTSC, PAL, SECAM or 4.43 NTSC is selected).
For GAMMA CORRECTION, see page 27.
CONTRAST
RGB
RESET
0 0 0
CONTRAST
RETURN
BRIGHTNESS
RGB
RESET
0 0 0
BRIGHTNESS
RETURN
TINT
COLOR
GAMMA
CORECTION
To switch back to the default condition of NORMAL, select RESET and press the ENTER button.
When selecting RESET, the buttons cannot be operated for 2 to 18 seconds.
Menu operation (continue)