Mitsubishi Electronics X100 Projection Television User Manual


 
31
OPTION menu
The following adjustments to optional items can be done in this menu.
AUTO POWER OFF PC CARD PLAY
SIGNALRECEIVE
USER PRESETS
LANGUAGE
USER
NO
English
Espanol
Deutsche
Francais
Italiano
MANUALFRONT
REAR
AUTO
AUTO
NTSC
PAL
SECAM
4.43NTSC
USER
RESET
30
USER
HELP
NORMAL
ENHANCED
POINTER
AUDIO
OPTION
QUIT
Select either FRONT or REAR to receive the infrared signal from the remote
control.
Use to select the length of time before the projector switches to standby when there
is no input signal selected source. Select OFF to cancel this function.
Select either MANUAL or AUTO mode to play back the PC CARD. If you select
MANUAL, the PC CARD will be played back according to the key operation. If you
select AUTO, the PC CARD will be played back according to the USER setting. If
you select USER and press the ENTER button, the user setting menu appears.
Selects the desired group to play back the PC CARD. Select the desired slot (SLOT1
or SLOT2) by pressing the ª or º buttons on the control panel (or { or }
buttons on the remote control) and press the button on the control panel (or %
button on the remote control). Select the desired group by pressing the ª or º
buttons on the control panel (or { or } buttons on the remote control).
Use to select the length of time before the image switches to the next image when
PC CARD PLAY is set to AUTO. Select DEFAULT to set the time to 1.0 min. If you
wish another time, select USER, then select the desired time by pressing the ª or
º buttons on the control panel (or { or } buttons on the remote control).
Select ON to repeatedly play back the PC CARD presentation repeatedly. If you
select OFF, the PC CARD will not be played back repeatedly.
Select RETURN and press the ENTER button to return to PC CARD PLAY menu.
When AUTO is set, the appropriate video standard is automatically selected accord-
ing to the input signal. If the image does not appear correctly, select the desired
video standard manually.
For USER PRESETS, see page 32.
Selects the desired language of the menu. Select the desired language by pressing
the ª or º buttons on the control panel (or { or } buttons on the remote con-
trol).
RECEIVE
AUTO POWER
OFF
PC CARD PLAY
PLAY
GROUP
SLIDE
TIME
REPEAT
SLIDE
SIGNAL
PLAY GROUP
SLIDE TIME
REPEAT SLIDE
SLOT 1
SLOT 2
RESET
DEFAULT
USER
1.0 min
ON
OFF
PC CARD PLAY
RETURN
GRP1
GRP2
USER
º
USER PRESETS
LANGUAGE