Mitsubishi Electronics X100 Projection Television User Manual


 
7
WARNING:
Unplug immediately if there is something wrong with your projector.
Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or
electric shock. In this case, unplug immediately and contact your dealer.
Never remove the cabinet.
This projector contains high voltage circuitry. An inadvertent contact may result in an electric
shock. Except as specifically explained in the Owner's Guide, do not attempt to service this
product yourself. Please contact your dealer when you want to fix, adjust or inspect the projector.
Do not modify this equipment.
It can lead to fire or electric shock.
If you break or drop the cabinet.
Do not keep using this equipment if you break or drop it. Unplug the projector and contact your
dealer for inspection. It may lead to fire if you keep using the equipment.
Do not face a lens to the sun.
It can lead to fire.
Use correct voltage.
If you use incorrect voltage, it can lead to fire.
Do not place the projector on uneven surface. Level stable surface only.
Please do not place equipment on unstable surfaces.
Do not look into a lens.
Do not look into the lens when it is operating. It may hurt your eyes.
Never let children look into the lens when it is on.
Do not turn off the main power abruptly or unplug the projector during
operation.
It can lead to lamp breakage, fire, electric shock or other trouble.
Place of installation
Refrain from setting the projector at any place subjected to high temperature and high humidity.
Precision devices are built into the projector. Please maintain an operating temperature, humidity,
and altitude as specified below for safety's sake.
Operating temperature: between +41°F (+5°C) and +95°F (+35°C)
Operating humidity: between 30 and 90%
Never put any heat-producing device under the projector so that the projector does not overheat.
Do not attach the projector to a place that is unstable or subject to vibration.
Do not install the projector near any equipment that produces a strong magnetic field. Also
refrain from installing near the projector any cable carrying a large current.
Place the projector on a solid, vibration free surface: otherwise it may fall, causing serious injury
to a child or adult, and serious damage to the product.
Do not stand the projector: it may fall, causing serious injury and damage to the projector.