Mitsubishi Electronics X100 Projection Television User Manual


 
33
Advanced feature for presentation
Cursor operation
1. Press the CURSOR button.
The cursor appears on the screen.
The default position where the cursor appears on the screen can be set by using this on-screen
menu.
2. Press the START/STOP button to ON.
The operation indicator will be illuminated.
(The operation indicator will turn off if the remote control is not used for a period of five minutes.)
3. Move the cursor by using the remote control.
Refer to page 13 for moving the cursor.
4. Press the START/STOP button to momentarily freeze the cursor movement. Press again to re-
sume moving.
5. Press the CURSOR button to cause the cursor to disappear.
To draw a freehand line
1. Press the ICON button.
The pen, eraser, color of the cursor trails and the width of the cursor icons
appear on the screen.
2. Select the pen icon, then press the SELECT button.
If necessary, change the color or width of the cursor trails by selecting
the icon and pressing the SELECT button repeatedly.
3. Position the cursor where you want the path to begin.
4. Press and hold the SELECT button, moving the cursor to draw a path.
To draw square lines
1. Move the cursor to where you want the point of one corner of the
square, and press the DOUBLE CLICK button. The cross mark ap-
pears.
2. Move the cursor to where you want the point of the opposite corner
and press the DOUBLE CLICK button again.
3. For more square lines, repeat steps 1 and 2.
The cross mark will be disappeared by pressing the CANCEL button.
To erase lines
1. Press the ICON button.
The pen, eraser, color of the cursor trails and the width of the cursor icons appear on the screen.
2. Select the eraser icon, then press the SELECT button.
3. Press and hold the SELECT button, moving the cursor to erase lines.
By pressing the CURSOR, MENU, EXPAND, NATIVE or PinP buttons, the cursor trails will
disappear.
You can also select the color and width of the cursor trails by using the on-screen menu.
When the MENU appears, the cursor will disappear.
When the cursor appears, the source ID will disappear.
You can not adjust the zoom/focus in the cursor operation mode.
Width
Eraser
Color
Pen