Filter
Top Products
11
Connection to Audio System
• Before changing the connections or installing the unit, all devices should be turned off.
• Refer to each owner's manual for further information on other devices.
AUDIO OUT
COAXIAL
AUDIO OUT
COAXIAL
COAXIAL
NOTE:
• When you play a DVD disc with connecting TV/VCR/DVD to a receiver with a Dolby Digital decoder, set "Dolby Digital" to "Stream" for
the "Digital Out" setting in the SETUP menu. (Refer to pages 12-13.)
• The audio source on a DVD disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT
deck.
• If the receiver does not have a Dolby Digital decoder, set "Dolby Digital" to "PCM" for the "Digital Out" setting in the SETUP menu.
Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to pages 12-13.)
• Set "Dolby Digital" to "PCM" for the "Digital Out" setting in the SETUP menu for connecting to an MD deck or DAT deck. (Refer to
pages 12-13.)
• By hooking this unit up to a Multi-channel receiver with a Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel
surround sound as heard in the movie theaters.
Receiver with Dolby Digital decoder
Digital audio
input jack
Audio Coaxial Digital cable
(available wherever consumer
electronics are sold)
AUDIO OUT
COAXIAL
(digital)
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-
marks of Dolby Laboratories.
CONNECTIONS
NOTE:
• Only DVD, CD and MP3 audio will be available at the AUDIO OUT COAXIAL jack.
T2021UB_01-44.QX33 04.9.16 10:58 AM Page 11