Filter
Top Products
56
Connecting to External Video Products
Connections
Connect the external video products properly to the
unit by using input jacks on the front of this unit.
Use S-Video or video cable and an audio cable for
this connection.
1 Press SETUP button to display SETUP/DISC
menu.
2
Select "SETUP" using
s
/
B
buttons, then press
ENTER button.
3 Select "Select Video" using
K
/
L
/
s
/
B
buttons,
then press ENTER button.
Press ENTER button.
Option window will appear.
4
Select the input jack type to connect using
K
/
L
buttons, then press ENTER button.
If you want to use S-VIDEO INPUT, select "S".
If you want to use VIDEO INPUT (Composite),
select "AUX".
5 Press SETUP button to exit.
Setup > Select Video
Line
Video In
AUX
S
DVD
Setup > Select Video
Line
AUX
DVD
Other devices
(ex. VCR camcorder etc.)
S-Video
cable
VIDEO
S- VIDEO
AUDIO
RL
OUTPUT
Audio
cable
Video
cable
or
Recording from External Video Products
Before recording from an external video product,
see the instructions for the connection in the previ-
ous section, “Connections”.
VCR
DVD-RW (VR)DVD-RW (Video)
DVD-R
1 Turn the unit on.
2
When you want to record onto a DVD:
Press
A
OPEN/CLOSE button on the main unit
to open the disc tray, then place the disc to
record properly, then press
A
OPEN/CLOSE
button again to close the disc tray.
NOTE:
• This operation may take a few minutes to complete.
When you want to record to a tape:
Insert the tape with a safety tab into the cassette
compartment.
3 Select the external input mode (“AUX” or “S”)
using CHANNEL
K
/
L
buttons.
4 Press REC SPEED button (For VCR, press REC
SPEED button twice), then change the recording
speed using
K
/
L
buttons until your desired speed
is displayed. Refer to "Recording Speed" on page
48 for DVD or page 28 for VCR.
5
Press DVD RECORD button or VCR RECORD
button to start recording.
6
Press PLAY button on the external video product.
7 For disc:
Press STOP C (DVD) button to stop recording.
NOTE:
• This operation may take a few minutes to complete.
For tape:
Press STOP C (VCR) button to stop recording.
SP SLP
VCR mode
XP SP LP
EPSLP
DVD mode
SEP
STOP C (DVD)
DVD RECORD
STOP C (VCR)
/
CHANNEL
K
/
L
REC SPEED
VCR RECORD
To record onto a
VHS tape, use the
VIDEO input.
S-VIDEO
Recording
onto DVD
only
RECORDING
OPERATING DVD RECORDER
T2021UB_45-88.QX33 04.9.16 4:28 PM Page 56