Filter
Top Products
OPERATING DVD RECORDER
P
LAYING
31
OPERATING DVD RECORDER
VCR FUNCTIONS / PLAYING
Playable discs
This unit is compatible to play the following discs.
To play a DVD, make sure that it meets the requirements
for Region Codes and Color Systems as described below.
Discs with the following logos can be played on the unit.
Other Disc types are not guaranteed to play.
Color systems
DVDs are recorded in different color systems
throughout the world. The most common color sys-
tems are NTSC (which are used primarily in the
United States and Canada), PAL and SECAM. This unit
uses NTSC, so DVDs you play must be recorded in
the NTSC system.You cannot play DVDs recorded in
other color systems.
Region codes
This unit has been designed to play DVD discs with
Region One (1). DVDs must be labeled for ALL
regions or for Region 1 in order to play on this unit.
You cannot play DVDs labeled for other regions.
Make sure to check the symbols below on your
DVDs. If these region symbols are not found on your
DVD, you cannot play that DVD in this unit.
The number inside the globe refers to region of the
world. Region 1 represents the United States,
Canada, Bermuda, the U.S.Virgin Islands and small
regions near Australia.
A DVD labeled for a specific region can only play on
the unit with the same region code.
DVD playback
The contents of DVD disc are generally divided into
titles. Titles may be further subdivided into chapters.
LogoDisc
DVD VIDEO
DVD-RW (VIDEO/VR MODE)
DVD-R (VIDEO MODE)
CD-DA (AUDIO CD)
CD-R (CD-DA FORMAT, MP3 files)
CD-RW (CD-DA FORMAT, MP3 files)
Start Rec. Stop/Start Stop Rec.
Title 1 Title 2
Chapter 1 Chapter 1Chapter 2 Chapter 3 Chapter 2
About DVD Playing
Before you play DVD discs, read the following information.
Press DISPLAY button repeatedly to bring up the
display menu for DVD status. This menu will give
you the information on the playing disc. Some oper-
ations are available while disc is playing.
1. Indicates a disc type and a format mode.
2. Indicates a recording speed and possible record-
ing time left.
3. Indicates a current channel number.
4. Indicates a title number, chapter number and the
time elapsed of disc play.
5. Icon Legend:
DVD-RW
SP 1:25 Rem.
CH 1
Video mode
11 0:00:00
C
DISC
1
2
4
3
5
: Search
: Audio
: Subtitle
: Angle (except VR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
: Virtual Surround
Guide to Displays
NOTE:
This menu is available only
when a disc is inserted into
the unit.
T2021UB_01-44.QX33 04.9.16 10:58 AM Page 31