Filter
Top Products
75
OTHERS
TROUBLESHOOTING
Symptom Remedy
Playback
The disc does not play. • No disc is inserted.
•A blank disc is inserted.
• No cassette tape is inserted.
• The disc is upside down. Insert the disc with the labeled
side facing up.
• The disc is not correctly inserted.
•
The unit cannot play certain discs (such as a CD-ROM) (page 31).
•
The region code on the DVD VIDEO does not match the unit (page 31).
• Moisture has condensed inside the unit. Remove the disc
and leave the unit turned on at least for 2 hours until the
moisture evaporates (page 5).
• If the disc was recorded on other recorder, the unit cannot
play the disc if it was not finalized (page 54).
Recording/Timer recording/Editing
The channel cannot be changed from
the channel you are recording.
•You can only watch the channel currently being recorded.
Recording does not start immediately
after you press DVD RECORD or
VCR RECORD button.
• An unused DVD-R or DVD-RW was inserted. It takes a
while for the unit to automatically format a disc.
•
Make sure the tape has a record tab when you record to a
cassette tape. If needed, cover the hole with cellophane tape.
Nothing was recorded even though
you set the timer setting correctly.
• There was a power failure during recording.
•
The units internal clock stopped due to a power failure that
lasted for more than 3 seconds. Reset the clock (page 19).
• Disconnect the AC power cord from the AC outlet and
connect it again.
•
The program contains copy protection signals that restrict copying.
• The timer setting overlapped with another setting that was
set later or has priority.
Recording does not stop immediately
after you press STOP C button.
• It will take a few seconds for the unit to input disc data
before recording stops.
Timer recording is not completed or
did not start from the beginning.
• The timer setting overlapped with another setting that was
set later or has priority (page 60).
• Disc space was not enough.
Timer recording is not available. • Make sure that the recordable tape or disc should be
inserted in the unit. If not, press POWER button.
The disc does not start playback from
the beginning.
•
Resume play was activated (page 36). Press STOP C (DVD)
button twice.
•
You have inserted a disc whose Title menu or DVD menu
automatically appears on the TV screen when it is first inserted.
The unit starts playing from the disc
automatically.
• The DVD VIDEO features an auto playback function.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
•
Depending on the disc, you may not be able to do some of the
operations above. See the instruction manual supplied with the disc.
The language for the sound track
cannot be changed.
• Multilingual tracks are not recorded on the DVD VIDEO,
DVD-R or DVD-RW being played.
• The DVD VIDEO prohibits the changing of the language
for the sound track.
•Try changing the language using the DVD VIDEO's menu.
The subtitle language cannot be
changed or turned off.
• Multilingual subtitle are not recorded on the DVD VIDEO.
• The DVD VIDEO prohibits changing of the subtitles.
•Try changing the subtitle using the DVD VIDEO's menu.
The angles cannot be changed. •
Multi-angles are not recorded on the DVD VIDEO being played.
•You are trying to change the angles when icon does
not appear on the TV screen (page 43).
• The DVD VIDEO prohibits changing angles.
•Try changing the angle using the DVD VIDEO’s menu.
T2021UB_45-88.QX33 04.9.16 4:29 PM Page 75