Sylvania LD190552 Flat Panel Television User Manual


 
26
DVD Audio Setting
Choose the appropriate audio settings for your equipment. It only
affects during the playback of DVD.
1 Use / to select the desired item, then press ENTER.
AUDIO
ENTER/OK
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
2 Adjust the following items.
DRC (dynamic range control)
(Default: ON)
This function is available only on the discs which are recorded
in the Dolby Digital format.
ON
Compress the range between soft and loud
sounds.
OFF No effects (original sound).
DOWN SAMPLING
(Default: ON)
This function is available only on digital outputting of a disc
recorded in 96kHz.
ON When outputting in 48kHz.
OFF When outputting the original sound.
Note
When playing back a 96 kHz disc with the copyright protection
or when [Virtual Surround] is set to [1] or [2], the sound will be
down sampled at 48 kHz even if the [DOWN SAMPLING] is set
to [OFF]. [Virtual Surround].
p. 33
DOLBY DIGITAL
(Default: BITSTREAM)
Set to [BITSTREAM] when this unit is connected to a Dolby
Digital decoder.
BITSTREAM Outputs Dolby Digital signals.
PCM
Converts the Dolby Digital into PCM. (2 channel)
Parental Setting
Parental setting prevents your children from viewing inappropriate
materials. (password protected.) Playback will stop if the ratings
exceed the levels you set.
1 Use the Number buttons to enter the 4-digit password for
your password, then press ENTER.
PARENTAL
ENTER/OK
Please enter a 4-digit password.
PASSWORD
• If you have set password already, use
the Number buttons to enter the current 4-digit
password.
• You cannot use the default password (4737) to play
back a DVD.
2 Use / to select the [PARENTAL LEVEL], then press
ENTER.
3 Use / to select the desired item, then press ENTER.
PARENTAL LEVEL
ALL
All parental locks are cancelled.
8 [ADULT]
All ratings (adult / general / children) can be
played back.
7 [NC-17]-2 [G]
Only DVD intended for general use and
children can be played back.
1 [KID SAFE]
Only DVD intended for children can be played
back.
To change the password
4 At step 2, use / to select [PASSWORD CHANGE]
then press ENTER.
5 Use the Number buttons to enter the new 4-digit
password.
Note
DVD-video may not respond to parental lock settings. Make sure
this function works with your DVD-video.
Record the password in case you forget it.
If you forget the password, press 4, 7, 3, 7, then enter your new
password. Password will be cleared and parental levels will be set
to [ALL].
A power failure will not erase your password.