Filter
Top Products
31
English
INTRODUCTION
PREPARATION WATCHING TV
USING FUNCTIONS
OPERATING DVD
CONNECTING DEVICES
INFORMATION USEFUL TIPS
Repeat Playback
Repeat function is available only during playback.
1
During playback, press
MODE
repeatedly until [ ]
appears.
2 Press ▲/▼ to change the repeat mode.
DVD
OFF repeat off
CHAPTER current chapter repeat
TITLE current title repeat
CD
OFF repeat off
TRACK current track repeat
ALL entire disc repeat
3 Press BACK to exit.
Repeat A-B Playback
You can repeat playback between A and B on a disc.
1 During playback, press MODE repeatedly until
[
AB
AB
] appears.
2 Press ENTER at your desired starting point (A).
3 Press ENTER at your desired ending point (B).
• Point B should be in the same title or track as point A.
• Within a few seconds, the section A-B will begin to play
back repeatedly.
4 To cancel repeat A-B playback, press MODE repeatedly
until [
AB
AB
] appears.
Press ENTER so [OFF] appears.
Note
• Repeat setting (except [ALL]) will be cleared when moving to
another title or chapter, track.
• During programmed playback, repeat setting will be effective for
the tracks in the program.
• Repeat playback or repeat A-B playback may not available with
some discs.
• Repeat A-B playback does not function during other repeat mode.
• To cancel point A, press CLEAR at step 2 in
[Repeat A-B Playback].
• Stopping playback will cancel repeat A-B playback.
Random Playback
CD
This function shuffl es the playing order of tracks instead of
playback in the sequence.
1 In stop mode, press MODE repeatedly until [RANDOM]
menu appears.
2 Press PLAY B to start random playback.
Note
• To repeat the current track in the random mode, follow the steps
1 and 2 in [Repeat Playback] and select [ TRACK].
➠
p. 31
• To repeat the entire random selections, follow the steps 1 and 2 in
[Repeat Playback] and select [
ALL].
➠
p. 31
Programmed Playback
CD
You may determine the order in which tracks will play back.
1 In stop mode, press MODE repeatedly until [PROGRAM]
menu appears.
2 Use ▲/▼ to select a desired track, then press ENTER to
store.
• Additional tracks may be on other screens. Use ▲/▼
to go on to the next / previous pages.
• Repeat this step until you have selected all the tracks
you wish to play back in the program.
• Up to 99 tracks can be ordered.
• If 8 or more tracks were in a program, use
SKIP H / G to see all the tracks.
3 Press PLAY B to start programmed playback.
Note
• Press CLEAR to erase the last track in the program if you make
an error.
• To erase all programmed tracks at once, select [ALL CLEAR] and
press ENTER at step 2.
• While a program is being played back, STOP C works as follows:
- Pressing STOP C once: The track will be in the resume standby
mode. Next time you press PLAY B, the playback will resume
from the point where it is stopped in the programmed playback.
- Pressing STOP C twice: Resume mode will be canceled. Next
time you press PLAY B, playback will restart from the fi rst track
in the original order. However, your programmed playback can
be restarted when you follow the above steps. (Your programs
are still stored until either the disc is ejected or the unit goes into
standby mode.)
- On some discs, STOP C will not work while the resume message
appears. Please wait until the message disappears.
• To repeat the current track in the program, follow the steps 1 and
2 in [Repeat Playback] and select [TRACK].
➠
p. 31
• To repeat the entire program, follow the steps 1 and 2 in [Repeat
Playback] and select [ALL].
➠
p. 31
• Ejecting the disc or the unit goes into standby mode will erase the
program.
• You cannot use the Number buttons to select another track
during programmed playback. Use SKIP H / G to select other
tracks in the program.
• You cannot combine random playback with programmed playback.
• You cannot alter a programmed order during playback.
• You can start programmed playback only while in [PROGRAM]
menu.