Filter
Top Products
19
RQT6986
Playing back
[VCD]
Switch [DVD, TV] to “DVD” and
Press the numbered buttons (0, 1j9) to
select an item.
e.g., “5”: [0] ➜ [5]
“15”: [1] ➜ [5]
[DVD-A] [DVD-V]
Press [3, 4, 2, 1] to select an item and
press [ENTER].
≥You can also use the numbered buttons (0, 1j9) to select an item.
Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
[9][5]: Shows the next menu.
[:][4]: Shows the previous menu.
[RETURN]: Shows the menu screen. [VCD]
[TOP MENU]: Shows the first menu screen. [DVD-A] [DVD-V]
[MENU]: Shows the menu screen. [DVD-V]
[Note]
≥Discs continue to rotate while menus are displayed. Press [∫]
when you have finished viewing to preserve the unit’s motor and
your television screen.
≥If “/” appears on the television, the operation is prohibited by
the unit or disc.
≥Functions available vary from disc to disc.
[HDD] [RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
(Effective only when the elapsed play time is displayed)
You can start play from a memorized position even after turning the
unit off.
1 During play
Press [POSITION MEMORY].
The message “Position Memorized” appears on the televi-
sion.
2 After switching the unit to standby and back on
Press [1] (PLAY).
Play starts from the memorized position. (The position is
cleared.)
[Note]
[DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]
≥The position is cleared when you open the disc tray.
[RAM]
≥Positions remain memorized even after the disc tray is opened.
≥You cannot mark positions if the disc is write-protected.
(cartridge ➜page 10, disc ➜page 44)
For your reference
If you press [∫] before switching the unit to standby after pressing
[POSITION MEMORY] to memorize a position, play will resume
from the position you pressed [∫] when you press [1] (PLAY).
[HDD] [RAM] [DVD-R]
A list of programs is created as you record them. You can use this
list to find programs to watch.
1 Press [DIRECT
NAVIGATOR].
The highlighted program
plays in the background.
2 Press [3, 4] to select the program
and press [ENTER].
≥To select with the numbered buttons:
e.g., [HDD] [RAM] [DVD-R]
“5”: [0]➜ [0]➜ [5] “5”: [0]➜ [5]
“15”: [0]➜ [1] ➜ [5] “15”: [1] ➜ [5]
Play of the images that were playing in the background continues.
To stop play
Press [∫].
To clear the program list
Press [DIRECT NAVIGATOR].
And more...
:Programs that have been rerouted to the HDD [HDD]
(➜page 27, Relief Recording)
:Programs that allow one copy [HDD]
[HDD] [RAM] [DVD-R]
1 Press [ERASE].
A confirmation screen will be displayed.
2 Press [2, 1] to select “Erase” and
press [ENTER].
≥
On the main unit, press [
D
,
E
] and [ENTER].
[Note]
≥It is not possible to erase the program when you are carrying out
chasing play, simultaneous rec and play or time slip play
(➜page 17). [HDD] [RAM]
≥The amount of space remaining on the disc does not increase
even if you erase programs. [DVD-R]
≥If the confirmation screen disappears before you complete the
operation, start from the beginning again.
When a menu screen appears on
the television
Position Memory
Using the Direct Navigator
About the program list
To erase a program that is being played back
Since the program, any play lists (➜page 32) created from
it are erased irretrievably by this procedure, you should be
certain you wish to erase before carrying it out.
DIRECT NAVIGATOR
No DATECH TIME EDITTITLE
9 : 00 PM
Auto action
02
6/20 WED
6
3
3
1
1
1
1
1
11 : 00 PM
USJ
03
6/20 WED
13
ENTER
RETURN
0
~
9
No.
TOTAL 3
SELECT
01
6/20 WED
4
10 : 00 AM
Dinosaur
DVD
e.g., DVD-RAM
3
3
0
~
N
TOTAL 5
¥
X
No D
A
CH
01 6/2
0
4
02 6/2
0
6
2
8
03
04
05
6/2
0
6/2
1
6/2
2
13
Write-protected
Displayed when you have protected
the program.
Copy-protected
Displayed when you have recorded
a program that has copy protection,
from CATV broadcasts, for example.
Unable to play
Displayed if you cannot play the program.
Currently recording
Displayed when the program is being
recorded.