Filter
Top Products
23
RQT6986
Playing back
To display still pictures one by one
Press [3, 4, 2, 1]
to select a still picture and then [ENTER].
To select the next or previous still picture
While in the still picture display, press [2, 1].
[2] : previous still picture [1] : next still picture
≥The still picture changes every time the button is pressed.
To return to the previous screen
Press [RETURN].
5 Press [3, 4] to select “Slide Show”
and press [ENTER].
The still pictures in the folder appear in numerical order.
To change the display timing
1 After step 2 on the left page, press [3, 4] to select “Settings”
and press [ENTER].
2 Press [3, 4] to select “Slide Show”.
3 Press [2, 1] to select the desired timing between still pictures
(0 – 30 seconds) (in base units of 1 second).
4 Press [ENTER].
To select the next or previous still picture
While in still picture display, press [2, 1].
[2] : previous still picture [1] : next still picture
≥The still picture changes every time the button is pressed.
To return to the previous screen
Press [RETURN].
5 Press [3, 4] to select “Play” and
press [ENTER].
Displayed icons
: Programs that
cannot be played
: Programs without
audio
6 Press [3, 4] to select a program and
press [ENTER].
≥To select with the numbered buttons:
e.g., “5”: [0]➜ [0]➜ [5] “15”: [0]➜ [1] ➜ [5]
To return to the previous screen
Press [RETURN].
To stop
Press [∫].
To pause
Press [;].
To skip programs
Press [:] or [9].
To skip a minute forward
Press [CM SKIP].
To search the point to play
Press [6] or [5] during play (3 steps). (Play pauses and only
the displayed time advances.)
Press [1] (PLAY) to restart play.
To display the on-screen display
Press [STATUS].
[Note]
≥Video on this unit’s display is expanded to fit an aspect ratio of
(320 k 240) dots and may be different from the aspect ratio of the
original video or may cause the edges of the video to be cut off.
≥The recorded date and time display may be different.
To display still pictures one by one with constant
interval (Slide Show)
To play SD VIDEO (MPEG4) programs
RETURN
0 -
- 9
No.
SD VIDEO
(MPEG4)
002
12/31
No. CH DATE
TITLE
EDIT
3
3
START
5:00 PM
001
11:00 AM
12/24
SD Card
ENTER
SELECT
Dinosaur
Auto action
4
2
1
1
1
1
1
e.g., SD Card
To erase a still picture or a SD VIDEO (MPEG4) program
(Still pictures and programs are erased irretrievably by this pro-
cedure.)
During play or while in still picture display
1 Press [ERASE].
2 Press [2, 1] to select “Erase” and press [ENTER].
To rotate the still picture
While in still picture display
1 Press [ENTER].
2 Press [3, 4] to select “Rotate RIGHT” or “Rotate LEFT” and
press [ENTER].
≥The still picture as a whole is rotated.
≥Rotation information will not be stored.
To display information about the still pictures
While in still picture display, press [ENTER].
(Date, “folder number” - “file number” and number of still pictures
are displayed.)
To give a title to a still picture folder
After selecting the still picture’s folder in step 4 on the left page,
press [1] to select “Folder Title” and press [ENTER].
(➜page 46, Entering text):
≥Titles inputted using this unit will not be displayed on other
equipment.
Folder structure
The following can be displayed on this unit.
e.g.,
§
Folders can be created on other equipment. However, these
folders cannot be selected as a copy destination.
≥
The folder cannot be displayed if the
numbers are all “0” (e.g.,
DCIM000 etc).
≥Files and folders that were created on equipment other than
this unit may not display properly or play.
XXXXXXXX.JPG
XXXXXXXX.TIF
Press [:, 9] to change between folders.
Press [:, 9] to change between folders.
Card
IM¢¢CDPF or IMEXPORT
DCIM (Still picture folder)
¢¢¢XXXXX
DCIM¢¢¢ (Still picture folder)
DVD-
RAM
JPEG
¢¢¢ : Numbers
XXX : Letters
XXXXXXXX.JPG
XXXXXXXX.TIF
XXXXXXXX.JPG
XXXXXXXX.TIF
¢¢¢XXXXX
DCIM
SD VIDEO (SD VIDEO folder)
XXXXXXXX.JPG
XXXXXXXX.TIF
§
§
¢¢¢XXXXX
MOL
¢¢¢
.ASF
PRL¢¢¢ (MPEG4 folder)
SD VIDEO (SD VIDEO folder)
MOL
¢¢¢
.ASF
PRL¢¢¢ (MPEG4 folder)
MOV
¢¢¢
.MOI
MOV
¢¢¢
.MOD
PRG
¢¢¢
.PGI
PRG¢¢¢ (MPEG2 folder)
MGRINFO
(MPEG2 control
information folder)