Filter
Top Products
54
RQT6986
Advanced operation
Changing the unit’s settings
See pages 51—53 for menu and option details.
1 While stopped
Press [SETUP] to show the menus.
2 Press [3, 4] to select the menu’s tab
and press [1].
3 Press [3, 4] to select the menu and
press [ENTER].
4 Press [3, 4] to select the option and
press [ENTER].
The screen now shows the menu again.
≥Some items require different operations. Follow the on-screen
instructions, or read the following explanations.
To return to the previous screen
Press [RETURN].
To exit the SETUP screen
Press [SETUP].
Panasonic DVD players and recorders use the same remote control
system so they may respond unintentionally to a command from this
remote control. Change the code on this unit and its remote control
(the two must match) if you place equipment close together.
≥Use “1”, the factory set code, under normal circumstances.
1 While stopped
Press [SETUP] to show the menus.
2 Press [3, 4] to select “Set Up” and
press [1].
3 Press [3, 4] to select “Remote Con-
trol Code” and press [ENTER].
4 Press [3, 4] to select the code (1, 2,
or 3) and press [ENTER].
The remote control code on the unit has been set.
5 While pressing [ENTER] on the
remote control, press and hold the
numbered button ([1], [2] or [3]) corre-
sponding to the code you selected in
step 4.
The remote control code on the remote control has been set.
6 Press [SETUP].
The following display appears when you use a remote control with a
different code.
If you are trying to use this unit’s remote control, change its code to
match the unit’s (➜ step 5, above).
Stereo 1 :Records sound (L1, R1) when DV recording is taking
place.
Stereo 2 :Records added sound such as narration (L2, R2)
subsequent to original recording.
Mix :Records both Stereo 1 and Stereo 2.
≥L1rL2 are recorded in L and R1rR2 are recorded in R,
except for SAP. When recording to a DVD-R or record-
ing in LPCM audio, the audio selected in “Select MTS”
(➜page 53) is recorded as Stereo 1.
Common procedures
DVD
TV
INPUT SELECT
VCR Plus+
OPEN/CLOSE
TV/VIDEO
CH
VOLUME
SKIP
DIRECT NAVIGATOR
PLAY LIST
TOP MENU
ENTER
MENU
FUNCTIONS
RETURN
STOP
PAU S E
PLAY/x1.3
SLOW/SEARCH
CANCEL
123
DVD TV
4
5
6
789
0
100
FRAME
CM SKIP TIME SLIP
ERASE
REC
PROG/CHECK
ADD/DLT
DUBBING
REC MODE
STATUS
MARKER
AUDIO
SETUP
DISPLAY
POSITION
MEMORY
POWER
3, 4, 2, 1
ENTER
RETURN
SETUP
HDD DVD
Numbered
buttons
TAB
SELECT
Antenna System
Auto Channel Setting
Channel Caption
Preset Channel Caption
Manual Channel Caption
VCR Plusi CH Setting
CATV
Channel
SETUP
RETURN
Set Up
Disc
Video
Audio
Display
TV Screen
Options
Menus
Tabs
Changing the remote control code
Audio channel for DV input
TAB
SELECT
Antenna System
Auto Channel Setting
Channel Caption
Preset Channel Caption
Manual Channel Caption
VCR Plusi CH Setting
CATV
Channel
SETUP
RETURN
Set Up
Disc
Video
Audio
Display
TV Screen
The unit’s remote control code