Filter
Top Products
69
RQTV0136
Play Page
Sound Page
Play fails to start even when
[1,PLAY] is pressed.
Play starts but then stops
immediately.
≥Insert the disc correctly with the label facing up.
≥The disc is dirty.
≥You tried to play a blank disc or a disc that is unplayable on the unit.
≥You tried to play a +RW that needs to be finalized on the equipment used for recording.
≥When recording to DVD-RAM using “EP ( 8Hours )” mode, play may not be possible on DVD
players that are compatible with DVD-RAM. In this case use “EP ( 6Hours )” mode.
≥You cannot play discs during DV Auto Rec.
≥If playing DivX VOD contents, refer to the homepage where you purchased it.
17
8
6, 7
–
58
51
29
Audio and video momentarily
pause.
≥This occurs between playlist chapters.
≥This occurs as scenes change during Quick View.
–
26
DVD-Video is not played. ≥Some DVD-Video cannot be played when you change the ratings level. 57
Alternative soundtrack and
subtitles cannot be selected.
≥Multiple languages are not recorded on the disc.
≥You may have to use the disc’s own menus to select languages.
–
–
No subtitles. ≥Subtitles are not recorded on the disc.
≥Set “Subtitle” in the Disc menu to “On”.
–
34
Angle cannot be changed. ≥This function depends on software availability. Angles can only be changed during scenes where
different angles are recorded.
–
You have forgotten your ratings
password.
≥With the tray open, press and hold [¥, REC] and [1] on the main unit simultaneously for about
5 seconds or more.
–
Quick View does not work. ≥This does not work when audio is other than Dolby Digital.
≥This does not work when recording is in XP or FR mode.
–
–
The resume play function does not
work.
≥Memorized positions are cancelled when the unit is turned off or when the tray is opened.
The memorized position on a playlist is also cancelled when the playlist or title is edited.
–
The Video CD picture does not
display properly.
≥When connecting to Multi-system TV, select “NTSC” in “TV System” in the Setup menu.
≥When connecting to PAL TV, the lower part of the picture cannot be displayed correctly during
search.
59
–
When playing a PAL disc, the
picture is distorted.
≥Set “Transfer” in the Picture menu to “Auto”. 35
When playing a DivX disc, the
picture is distorted.
≥Change “Source select” in the Disc menu. 34
It takes time before play starts. ≥This is normal for DivX video. –
Picture stops. ≥The picture may stop if the DivX files are greater than 2 GB. –
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio
type.
≥Check the connections and “Digital Audio Output” settings. Check the input mode on the amplifier
if you have connected one.
≥Press [AUDIO] to select the audio.
≥Set “V.S.S.” in the Sound menu to “Off” in the following cases.
- When using discs that do not have surround sound effects such as Karaoke discs.
- When playing bilingual broadcast titles.
≥[DVD-A] The disc may have a restriction on the method of audio output. Some multi-channel
DVD-Audio discs prohibit down-mixing. If this is the case, this unit can only output the front two
channels. Refer to the disc’s jacket.
≥Audio may not be output due to how the DivX files are created.
12, 13, 58
27, 33
35
–
–
Cannot switch audio. ≥You cannot change the audio type when playing DVD-R, DVD-R DL, DVD-RW (DVD-Video
format), +R, +R DL or +RW. (You can select “M 1” or “M 2” in “Bilingual Audio Selection” in the
Setup menu before recording.)
≥You have used a digital connection. Set “Dolby Digital” to “PCM” or connect using audio cables
(analogue connection).
≥There are discs whose audio cannot be changed because of how the disc was created.
58
13, 58
–
Troubleshooting guide
RQTV0136.book 69 ページ ２００６年４月１９日 水曜日 午後１時２８分