Filter
Top Products
27
RQT8857
To cancel a timer recording in progress
STOP
– Confi rmation screen appears.
to select “Stop Recording”,
then
OK
Notes
Recording stops and the timer programme is deleted. (Daily and
weekly timer programmes remain and timer recording will start as
programmed.)
The timer recording list can be viewed even when the
unit is off.
PROG/CHECK
– See “Tips” (¼ 28) for explanation of icons
displayed.
, to select the programme.
– “” (¼ 28) disappears from the timer
recording list.
– Press the “Red” button again to activate timer
programme.
To deactivate timer programme
(e.g. to interrupt a daily or weekly timer
programming)
Notes on timer recording
Timer recordings are activated regardless of whether the unit is
turned on/off.
Timer recordings begin when the set time is reached even when
playing.
Timer recordings do not begin while editing or copying.
If the unit is turned on when timer recording begins, it
remains turned on after recording fi nishes. It does not turn off
automatically. You can turn the unit off during timer recording.
If the unit is not put in the timer recording standby mode at least
10 minutes before the programmed timer recording starting time,
the “” fl ashes on the unit’s display.
When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
ProgrammeProgramme
RecordedRecorded
Not recorded
(Red)
Advanced FeaturesAdvanced Features
Tips
You can deactivate the timer programme in the following
procedure as well.
Perform steps - (¼ above)
1. Press [OPTION]
2. Press [, ] to select “Timer Off”, then press [OK].
While the unit is on
DRIVE
SELECT
to select the drive.