74
RQT8857
Video Cassette Handling
Video cassettes
Tab
Break off the video cassette’s tab to prevent
accidental erasure. Cover the hole with a
double layer of adhesive tape when you
want to use the video cassette for recording
again.
You can use video cassettes with the VHS and S-VHS marks, but the
unit is unable to make full use of the characteristics of S-VHS video
cassettes.
Video cassette care
Poor quality or damaged video cassettes can cause the heads to
become dirty and malfunction. Store your video cassettes carefully
and discard them when they become dirty or damaged.
Never use video cassettes on which juice has been spilled or those
that are extremely damaged since this will not only cause the heads
to become dirty, but will also make the unit malfunction.
Video Cassette Information
Insert a cassette (the surface with the roll of tape
should face up).
– The unit turns on automatically.
To eject:
From the main unit:
or
From the remote control
DRIVE
SELECT
to select the VHS drive.
STOP
Press and hold for 3 or more seconds.
Inserting a Video Cassette
EJECT