Filter
Top Products
38
RQT8857
Advanced Video Cassette Playback
Notes
Up to 20 index signals can be searched in either direction.
If you overshoot in either direction, press the opposite button to
correct.
For correct operation, make recordings of at least 5 minutes to
ensure that index signals are not spaced too closely together.
VHS Index Search System (VISS)
The unit automatically records special index signals on
a tape every time a recording is started (via [ REC], or
a timer recording). The index search function makes use
of these index signals to help you fi nd the beginning of a
desired programme quickly and easily.
While stopped or during normal play
or .
– The unit automatically starts playback after the index
signal is found.
– Each press increases the number of skips.
– Press [ STOP] to cancel the search.
S-VHS Quasi Playback (SQPB)
This unit can play tapes recorded in S-VHS.
Some picture noise may occur depending on the type
of tape used.
It is not possible to fully obtain the high resolution
S-VHS is capable of.
This unit cannot record in S-VHS.
Notes
Only works if there is at least 5 seconds blank space at the end of
the programme.
When the tape reaches the end of the programme, it will
automatically rewind to the beginning and play again.
Repeat Playback
During playback or while stopped
PLAY
Press and hold for about 5 or
more seconds.
– Repeat Playback goes on indefi nitely until you
cancel it.
– The “R ” indication appears on screen.
– Press [ STOP] to stop play.
Tips
To remove the noise from a paused picture:
Start slow play (¼ 37), then adjust the tracking.
Manual Tracking
During playback
CH
TRACKING/V-LOCK/PAGE
or
CH
TRACKING/V-LOCK/PAGE
Press and hold until the picture noise
disappears.
To return to auto tracking:
CH
TRACKING/V-LOCK/PAGE
(simultaneously).
The unit usually makes tracking adjustments
automatically, but you may need to do it manually if noise
appears on a tape recorded on other equipment.
Adjusting the Playback Picture
Adjust the vertical synchronisation to stop the picture
from shaking while paused.
Vertical Locking Adjustment
Notes
This function may not work with some tapes.
You can also adjust vertical synchronisation with [CH , ] on the
main unit.
While paused
CH
TRACKING/V-LOCK/PAGE
or
CH
TRACKING/V-LOCK/PAGE
Press and hold until the shaking stops.
To return to the standard position:
CH
TRACKING/V-LOCK/PAGE
(simultaneously).
Notes
This function may not work with some tapes.
You can also adjust the tracking with [CH , ] on the main unit.