Filter
Top Products
90
RQT8857
On the TV
Page
Cannot fi nish recording completely.
The programme was copy-protected.
−
The disc may be full.
−
The maximum number of title has been exceeded.
20
Cannot play.
You inserted an incompatible disc.
71
Cannot record to the disc.
The disc may be dirty or scratched.
72
Unable to format.
Please check the disc.
Cannot record. Disc is full.
[RAM] [-RW‹V›] [+RW] Create space by erasing unwanted titles. Even if you
erase recorded content from the DVD-R, DVD-R DL, +R or +R DL there
is no increase in disc space. Available recording space on a DVD-RW
(DVD-Video format) or +RW disc increases when the last title is deleted
(space may increase slightly when you delete other titles).
18, 45,
56
Cannot record. Maximum number of
titles exceeded.
Use a new disc.
−
No Disc
You haven’t inserted a disc. Correctly insert a disc that the unit can play.
70, 71,
72
The disc is upside down. If it is a single-sided disc, insert it so the label is
facing up.
72
No cassette.
There is no video cassette in the tape deck when playing or recording TV
programmes. Insert a video cassette.
74
The cassette is write-protected.
A video cassette without a secure accidental erasure prevention tab is
inserted when recording programmes. Use a video cassette with a secure
accidental erasure prevention tab.
74
Now recording on DVD.
To watch pictures on VHS, use AV1
socket, and switch to an appropriate
AV channel on your TV.
The VHS plays back while recording on DVD. You can watch the VHS
playback by connecting to the DVD/VHS common terminals.
66
Please set clock.
Set the clock.
11
This is a non-recordable disc.
The unit cannot record on the disc you inserted. Insert a DVD-RAM or
unfinalised DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL or
+RW disc.
70
The disc may be incompatible or of poor quality.
70, 71
This disc is not formatted properly.
Format it using DVD Management
in FUNCTION MENU.
You inserted an unformatted DVD-RAM, DVD-RW, +R, +R DL or +RW disc.
Format the disc with the unit.
56
The operation is prohibited by the unit or disc, or video cassette.
−
On the Unit’s Display
(Continued)
Page
U72
U73
The HDMI connection acts unusually.
– The connected equipment is not HDMI compatible.
– The HDMI cable is too long. Please use a cable 5.0 meters or less.
– The HDMI cable is damaged.
−
U76
HDMI cannot be output because you are connected to a model that does
not support copyright protection.
−
U88
There was something unusual detected with the disc while recording,
playing or copying; there was a power failure or the AC
mains lead
was
disconnected while the unit was on. The unit is carrying out its recovery
process. This process restores the unit to normal operation. The unit is not
broken. Wait until the message disappears.
77
U80
U81
U99
The unit fails to operate properly. Press [/I] on the main unit to switch the
unit to standby mode. Press [/I] on the main unit again to turn the unit on.
−
X HOLD
The Child Lock function is activated.
Press and hold [OK] and [RETURN] simultaneously until “X HOLD”
disappears.
65
Messages