Filter
Top Products
25
Preparations for Editing
Editing Functions
Copying
Allows the re-recording (copying) of the picture and
sound from one tape onto another tape.
Video Insert
Allows the partial replacement of the picture on a
recorded tape. Sound is left in its original state.
Audio Insert
Allows the partial replacement of sound on a recorded
tape. Picture is left in its original state.
AV Insert
Allows the partial replacement of the picture and sound
on a recorded tape.
Using this VCR, 4 types of One-Touch-Edit, 3 types of
Manual Editing and 3 types of Programme Editing
can be selected.
In Programme Editing, after setting the edit start/end
point, editing can be performed automatically. Edit
programmes can be set up to 10 scenes for each editing
function (20 scenes for Assemble editing).
Programme editing with Time Code enables high edit
accuracy, typically within 5 frames at the edit start point
(1 frame=1/25th of a second).
The accuracy of the edit start/end point on the playback
VCR will vary depending on the VCR/Movie Camera
being used. Use the Edit Timing Adjustment function to
give the best possible accuracy.
One-Touch-Edit
≥ Assemble Editing [R40]
≥ Insert Editing (Video, Audio, AV) [R41]
≥ Audio Dubbing [R41]
≥ Audio Mixing [R42]
Manual Editing
≥ Copying [R43]
≥ Insert Editing (Video, Audio, AV) [R44]
≥ Audio Dubbing [R45]
Programme Editing
≥ Assemble Editing [R46]
≥ Insert Editing (Video, Audio, AV) [R48]
≥ Audio Dubbing [R50]
Performing the AV Insert editing operation on a tape that
was recorded in 12bit audio mode.
Performing the Copying operation on a tape that was
recorded in 12bit audio mode.