Filter
Top Products
Helpful Hints
59
On Screen Display Messages
[Copying of this material is not allowed.]
‘ Tapes which contain copy protection codes
cannot be edited, whether in the playback unit or
the recording unit.
[Editing cannot be made. Please check switches setting
and cables.]
‘ Are the necessary cables for controlling the
playback unit (Edit cable, LANC cable, DV cable)
connected?
‘ Is the playback unit turned off?
‘ Are Edit Mode, Edit Terminal, and the INPUT
SELECT setting on the NV-DV2000 set properly
for the desired editing operation?
‘ Is there more than one digital video device
(including personal computers) connected to the
NV-DV2000?
‘ Are the NV-DV2000 and the unit connected to the
NV-DV2000 both set to control each other (if the
connected unit is a digital video device)?
[Audio Dubbing or Audio Mixing cannot be made with
DV input mode.]
‘ Audio Dubbing and Audio Mixing functions will not
work if INPUT SELECT is set to DV1 or DV2. Set
to A2, A3 or A4.
[AV Insert cannot be made with DV input mode.]
‘ AV Insert will not work if INPUT SELECT is set to
DV1 or DV2. Set to A2, A3 or A4.
[Please select DV input mode.]
‘ Is Edit Terminal set to DV, but INPUT SELECT is
set to something other than DV1 or DV2?
[This tape is an incorrect type. Please replace the tape.]
‘ A video cassette tape other than a MINI DV
cassette has been inserted.
DVC PRO cassettes cannot be used with the
NV-DV2000.
[This tape is for cleaning only.]
‘ Has an attempt been made to record or edit the
cleaning tape?
Before requesting service, check the following points
once again.
The error message is indicated in brackets [ ].
[Please insert video tape.]
‘¥ (REC/OTR), 1 (PLAY),
5 (FAST FORWARD), 6 (REWIND) or
JOG/SHUTTLE is pressed when no cassette is in
the VCR. Insert a video tape.
[Recording not allowed. Check setting of the record-
prevention tab.]
‘¥ (REC/OTR) has been pressed when using a
cassette with the opened record-prevention tab.
Use a cassette with the closed record-prevention
tab.
Messages of On Screen Display for
Editing Operations
[Please insert video tape.]
‘¥ (REC/OTR), 1 (PLAY) or JOG/SHUTTLE has
been pressed when the editing operation using
EDIT MENU screen is performed in the VCR.
Insert a video tape.
[Recording not allowed. Check setting of the record-
prevention tab.]
‘¥ (REC/OTR) has been pressed when using a
cassette with the opened record-prevention tab.
Use a cassette with a closed record-prevention
tab.
[This function cannot be made in the blank part of the
tape.]
‘ Are you trying to edit using a blank tape, or a tape
that contains a blank segment in the middle?
Editing is not possible in blank segments
(because there are no Time codes). In order to
use such a tape for editing, copy the tape once so
that continuous Time codes are recorded on the
tape, even if there is nothing else recorded on the
tape.
[This function is not allowed in LP-recorded section of
the tape.]
‘ It is not possible to edit a tape that was recorded
in LP mode, or that was recorded partly in SP
mode and partly in LP mode. Make a copy of the
tape in SP mode and then use that tape.
[This function cannot be made with 16bit mode audio
recording.]
‘ Does the audio mode change in the middle of the
tape?
The Audio Dubbing and AV Insert functions can
only be used on a tape that was recorded in 12bit
audio mode.
Other messages may also appear.
Follow the instructions in the message.