Filter
Top Products
42
Preparations
≥ Confirm that the TV is on and the VCR viewing
channel is selected.
≥ Complete necessary connections and settings.
[R28–35]
≥ Set One-Touch-Edit to ON on Edit functions menu.
[R37]
Operations
1 Press JOG/SHUTTLE on the Editing controller, and
check that the button is lit.
2 Search for the edit start point on the
recording VCR.
3 Press AUDIO DUB on the Editing
controller.
≥ The picture from the playback unit
appears on the screen.
4 Press MIXING EDIT.
5 Search for the edit start point on the playback unit.
6 Press JOG/SHUTTLE on the Editing controller.
≥ Editing begins.
≥ If you wish to adjust the volume of the original
audio (STEREO1) and external recording source
(A2, A3 or A4) during Audio Mixing,
AUDIO MIX: To adjust the volume of the
original audio (STEREO1).
AUDIO REC LEVEL: To adjust the volume of the
audio from external recording
source (A2, A3 or A4).
≥ To continue editing, press JOG/SHUTTLE on the
Editing controller, and repeat steps 5–6.
7 Press ∫
(STOP) on the Editing controller to stop
editing.
<
EJECT
AUDIO
OUT
REW STOP
PLAY
FF PAUSE
STEREO
SERECT
DV IN/OUT
DV SELECT
1
2
EDIT 8mm CONTROL
¥
AV4
OUT
AV4
EDIT CONTROL
RECORDER
PRINTER/
D.STILL PICTURE
PLAYER
PASSIVE
EDIT
DV
8mm
CONTROL
SP/LP TBC 3D DNR PRINT
AUDIO REC LEVEL
AUDIO MIX
STILL
ALBUM
INPUT SELECT
010
STEREO1
STEREO1 STEREO2
100
¥
REC
/
OTR
MIXING EDIT
MIXING EDIT
4
6
DIGITAL VCR
3
1,5
7
2,5
S-VIDEO
VIDEO
L– AUDIO – R
To Monitor the Mixed Audio after Audio Mixing
Press STEREO SELECT during playback and select
STEREO2.
Notes:
¡ Audio Mixing is not possible in the following
cases:
When the tape in the recording VCR (the NV-DV2000)
is:
Recorded in 16bit audio mode;
Recorded in LP mode;
Blank, or contains a blank portion in the middle.
When INPUT SELECT is set to DV1 or DV2.
¡ In order to ensure that the editing operation is
performed properly, the editing points should be set at
least 20 seconds after the beginning of the tape.
¡ When using the Editing controller for remote control:
In order to conserve battery power, JOG/SHUTTLE
turns off after 30 seconds.
If JOG/SHUTTLE turns off after the edit start point
has been set on the recording unit (step 2), it is
necessary to press JOG/SHUTTLE again (so that it is
lit) before searching for the edit start point on the
playback unit.
If JOG/SHUTTLE turns off after the edit start point
has been determined on the playback unit (step 5), it
is necessary to press JOG/SHUTTLE again in order
to start editing.
One-Touch Audio Mixing
This function is used to mix the audio on STEREO1, which has already been recorded, with audio from a external
recording source (A2, A3 or A4), and record the result on STEREO2.
This function is useful for adding new audio, such as music or a narration, to the original audio which has already
been recorded.
ST 2
ST12
A DUB
L
R
dB -¶ 30 20 10 5 0 OVER
l l l l l l l l
l l l l l l l l l
ST 2
ST1 2
L
R
dB -¶ 30 20 10 5 0 OVER
l l l l l l l l
l l l l l l l l l
ST1 2
ST1 2