Filter
Top Products
68
@1 Alarm Reset button (RESET)
Cancels an activated alarm.
Press this button to reset an alarm activated in the cur-
rently active unit.
Pressing this button while holding down the SHIFT but-
ton cancels all currently activated alarms at a time (ALL
RESET).
Pressing RESET in the camera menu will reset the para-
meter of a selected item or open the Special camera
menu when the cursor is positioned on SPECIAL in the
menu. Pressing it while holding down the SHIFT button
will restore all factory default settings.
@2 Group Preset button (GROUP PRESET)
In combination with the numeric buttons, activates a
previously programmed Group Preset function.
Pressing this button while holding down the SHIFT but-
ton will display the Operator ID number on the LED
Display for about 3 seconds (OPE ID).
@3 Previous button (PREV)
Moves a Tour Sequence one step backward from the
step that was previously paused on the active monitor
by pressing the PAUSE button.
This button is also used to select a camera. Pressing
PREV while holding down the CAMERA (ENTER) button
will replace the currently selected camera with the next
lower camera number, if the active monitor is in Spot
mode.
Similarly pressing PREV while holding down the MONI-
TOR button will select the next lower monitor number.
When selecting alarms, pressing PREV while holding
down the ALARM button will select the previous alarm.
Pressing this button while holding down the SHIFT but-
ton will display the Controller ID number on the LED
Display for about 3 seconds (S-CTL ID).
@4 Next button (NEXT)
Moves a Tour Sequence one step forward from the step
that was previously paused on the active monitor by
pressing the PAUSE button.
The button is also used to select a camera. Pressing
NEXT while holding down the CAMERA (ENTER) button
will replace the currently selected camera with the next
higher camera number, if the active monitor is in Spot
mode.
Similarly pressing NEXT while holding down the MONI-
TOR button will select the next higher monitor number.
When selecting alarms, pressing NEXT while holding
down the ALARM button will select the next alarm.
@5 Log Out button (LOG OUT)
In combination with the CAMERA (ENTER) button, logs
out from the system.
To prevent a log-out error, press CAMERA (ENTER)
while holding down the LOG OUT button.
@6 Pause button (PAUSE)
Pauses a Tour or Group Sequence that is being run on
the active monitor.
Pressing PAUSE while holding down the SHIFT button
will close the camera menu on the active monitor. The
STOP indicator will go off. (CAM MENU OFF)
@7 Stop button (STOP)
Ends a Tour Sequence that is being run on the active
monitor.
To end a Group Sequence, select one of the monitors
that displays the selected sequence, then press this
button.
Pressing STOP while holding down the SHIFT button
will open the camera menu on the active monitor. The
STOP indicator will light. (CAM MENU ON)
@8 Function buttons (F1, F2)
Provide access to camera attributes and operating
functions.
F1: Reserved for future use.
F2: Pressing this button will select the mode for control-
ling selected camera functions (CAM FUNC).
@9 Group Sequence button (GROUP SEQ)
In combination with the numeric buttons, runs a Group
Sequence on the assigned monitors.
Pressing GROUP SEQ will restart a forward sequence
from the next step that was previously paused by
pressing the PAUSE button.
#0 Tour Sequence button (TOUR SEQ)
In combination with the numeric buttons, runs a Tour
Sequence on the active monitor.
Pressing TOUR SEQ will restart a forward sequence
from the next step that was previously paused by
pressing the PAUSE button.
#1 OSD (On Screen Display) button (OSD)
Displays or hide some of the information on the screen
of the selected monitor. Press the numeric buttons
shown below, then press the OSD button.
1: Clock Display (T&D)
2: Camera Title Display (CAM ID)
3: General Status Display (GEN)
5: Monitor Status Display (MON STATUS)
6: All Displays except clock (ALL)