155
Scenes over limit.
Cannot divide scene.
The number of entered scenes has reached the limit that can be
entered.
Delete several scenes.
108, 116
Scenes over limit.
Cannot move scene.
This message will appear if you try to move a scene when the
number of scenes has already reached the registrable limit.
105, 116
Stop processing The button was pressed to stop processing of multiple scenes. ⎯
There was no scene
which can be deleted.
This message will appear if you try to delete multiple scenes on Disc
Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
102, 110
This card cannot be
used.
Please replace card.
The card cannot be used in this DVD Video Camera. Use another
card. 30
This disc cannot be
used. Please replace
disc.
A disc that cannot be used in this DVD Video Camera has been
loaded. Check the type of disc. 29
This disc is recorded by
the PAL system. Please
replace disc.
This DVD Video Camera can use only discs recorded on the NTSC
system. A disc recorded on the PAL system cannot be used in this
DVD Video Camera.
⎯
Top scene cannot be
divided.
Division is not possible at the start of scene.
108
UNFORMAT DISC The disc is not initialized or it is damaged.
If this message appears, be sure to initialize the disc in this DVD
Video Camera before using it.
Reinitializing even a disc used in this DVD Video Camera may be
necessary (initializing will erase all recorded contents on disc). If
this message appears, try to initialize the disc. If the same message
still appears, the disc may be damaged. Use another disc.
125
See *2 on page 156. ⎯
Use AC adapter/
charger.
Finalization is not possible when the DVD Video Camera is powered
by a battery pack. Use the AC adaptor for finalization.
45, 127
Use AC adapter/
charger.
Turn off power.
Scene cannot be repaired when the DVD Video Camera is powered
by a battery pack.
If the AC adaptor is unavailable in handy place, remove the disc, use
the opposite side, or use another disc. To repair the removed disc,
insert the disc into the DVD Video Camera afterwards, and connect
the AC adaptor.
45
VIDEO scene cannot be
copied to card.
No movie can be copied to card.
Select stills and copy them to card.
109
Write protected.
Check card.
• A locked card or write-protected disc is inserted.
• Release the lock or write-protect using the Card or Disc
Navigation menu.
30, 124
Write protected.
Check disk.
Message Cause & Troubleshooting
Reference
page
VDR-M95M75M55M53PP.book Page 155 Tuesday, March 29, 2005 2:19 PM