Filter
Top Products
153
DISC ACCESS The recorded scene is being stored on disc.
Wait until the message disappears, and you can start to use the
DVD Video Camera.
51, 52
This DVD Video Camera is verifying whether the correct disc has
been inserted.
Wait until the message disappears, and you can start to use the
DVD Video Camera.
⎯
DISC ALMOST FULL The disc will soon be full, and recording will be impossible.
Delete unnecessary scenes and try the disc again, or use another
disc.
32, 33,102
Disc error has occurred.
Finalizing is not
complete.
• Disc error occurred during finalizing, and finalizing failed.
Replace the disc.
• See *3 on 156.
127
Disc error has occurred.
Format the disc now?
• Has the disc been initialized on PC? Has initializing the disc on
PC been interrupted?
Choose “YES” and initialize the disc when using it on this DVD
Video Camera. Initializing the disc will erase all data on it.
• See *2 on page 156.
125
Disc error has occurred.
Formatting is not
complete.
The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc. before reusing
it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
30, 125
Disc error has occurred.
Keep disc inside &
restart.
Disc error could have occurred during editing of scenes.
Turn off the DVD Video Camera with the disc being used in it,
connect AC adaptor, and then power the DVD Video Camera again.
Repair of scenes will be tried.
45
Disc error. • Use another disc.
• See *3 on page 156.
28, 30
• Mismatch in recording information may be caused by editing
done on some device other than this DVD Video Camera.
Initialize the disc or use another disc.
• Initializing the disc will erase all data on it.
125
Disc full. Cannot
execute.
Delete unnecessary scenes before using this disc, or use another
disc.
102
Disc has no data. This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.
⎯
Disc has no Play List. Switching of play list was selected with no play list stored. 117
Disc includes protected
scenes. Delete scenes?
The disc may have been software protected using a device other
than this DVD Video Camera. To release in this case, use the device
that has executed software-protect.
⎯
Disc is full. Cannot add
control info.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
102, 107
Disc is not formatted.
Format the disc now?
• Has the disc been initialized on a PC?
Choose “YES” and initialize the disc when using it on this DVD
Video Camera. Initialization will delete all data on the disc.
• See *2 on page 156.
125
Message Cause & Troubleshooting
Reference
page
VDR-M95M75M55M53PP.book Page 153 Tuesday, March 29, 2005 2:19 PM