Filter
Top Products
89
Note:
• The PHOTO Input setting can be confirmed using the on-
screen information.
• The PHOTO Input setting will be stored in memory even
when the DVD Video Camera is turned off.
• Refer to “Recording (Dubbing) Images” on page 75 to
see how to connect the DVD Video Camera to another
device.
• “PHOTO Input” is displayed only when “Input Source” is
set to “LINE” or “S LINE” (VDR-M75PP/VDR-M95PP
only).
• “OSD Output” is displayed only when “Input Source” is set
to “CAMERA”.
13
Self Timer
You can record photos using the self timer function, as with ordinary cameras.
1 Press the MENU button,
choose “Self Timer” on
the “Record Functions
Setup” menu screen, and
then press the A
button.
2 Select “On”, and then press the A button.
The self timer will be set.
3 Press the MENU button to end the setting.
4 Press the Photo shot button.
The recording indicator at the front of DVD Video
Camera will blink.
The Self timer indicator will start to count down,
and recording will commence approximately 10
seconds later.
Note:
• You can also check that self timer has been set by
reviewing the on-screen information.
• To release the self timer mode, choose “Off” on the menu
screen or turn DVD Video Camera off.
• To suspend self timer, press the Photo shot button again
before recording starts, or press the g button.
• “PHOTO Input” is displayed only when “Input Source” is
set to “LINE” or “S LINE” (VDR-M75PP/VDR-M95PP
only).
• “OSD Output” is displayed only when “Input Source” is set
to “CAMERA”.
The self timer function is valid only when recording photos (stills).
Self Timer
Record Functions Setup
On
Off
RAM
OSD Output
Input Source
ENTER RETURN
10
999
REM
8:00AM
SEP 30 2005
Self timer recording
VDR-M95M75M55M53PP.book Page 89 Tuesday, March 29, 2005 2:19 PM