Filter
Top Products
93
123
Initial Settings
Switching Operating Sound On or Off (Beep)
1 Press the MENU button,
choose “Beep” on the
“Initial Setup” menu
screen, and then press
the A button.
2 Select “On” or “Off”, and then press the A
button.
3 Press the MENU button to end setting.
Note:
The “Beep” setting will be stored in memory even when the
DVD Video Camera is turned off.
Turning DVD Video Camera Off Automatically (Power Save)
1 Press the MENU button,
choose “Power Save” on
the “Initial Setup” menu
screen, and then press
the A button.
2 Select “On” or “Off”, and
then press the A button.
3 Press the MENU button to end setting.
Note:
• To turn the DVD Video Camera on again from automatic
off activated by the power save function, set the power
switch to “OFF”, and then set it to “ ”, “ ” or “ ”.
• The Power Save setting will not appear in the on-screen
information display.
• The Power Save setting will be stored in memory even
when the DVD Video Camera is turned off.
Setting Contents
On
Beep is heard when the power switch is turned on/off, the REC button is pressed,
etc.
Off
No beep is heard.
Initial Setup
On
Off
RAM
Power Save
Beep
ENTER RETURN
Reset
Language
Record LED
Setting Contents
On
To engage power save. If the DVD Video Camera is left in recording pause mode
without being operated for 5 minutes, it will automatically turn off to prevent the
battery from discharging needlessly.
Off
To cancel power save.
Initial Setup
On
Off
RAM
Power Save
Beep
Record LED
ENTER RETURN
Reset
Language
VDR-M95M75M55M53PP.book Page 93 Tuesday, March 29, 2005 2:19 PM