Panasonic VDR-M55PP DVD Player User Manual


 
98
Playing Back from Disc Navigation Screen
1 Press the DISC NAVIGATION button.
2 Use the control buttons to select the desired
scene.
The selected scene will be framed: This is called
a “cursor”.
3 Press the A button.
Playback will start from the selected scene.
Note:
Pressing the d / c button will move the cursor to the
preceding or following scene.
Pressing the
f / e button will move to preceding or
following page.
lWhen playback ends
The DVD Video Camera will
enter playback pause mode
at the last image of last
scene.
Pressing the g or DISC
NAVIGATION button will
restore the Disc Navigation
screen.
If playback pause continues for as long as 5
minutes, the Disc Navigation screen will
automatically be restored.
lPlaying back stills
When playing back stills on disc, a still will be
displayed for approx. 3 seconds.
When playing back stills on card, playback will stop
after each still playback.
Note:
Press the A button to temporarily stop playback.
Pressing A again will start from that point.
If you press the A button after playback of the last
scene on disc finishes, playback will start again from the
beginning of disc.
Pressing the g button will always restore the Disc
Navigation screen.
When playing back a card still with a large number of
pixels, “Playback.” will appear, and it will take some time
for the still to appear.
001/014All Programs
PLAY
RAM
007/014All Programs
PLAY
RAM
A
Playback pause
VDR-M95M75M55M53PP.book Page 98 Tuesday, March 29, 2005 2:19 PM