Filter
Top Products
40
Setting Date and Time
Set the current date and time so that the date and time at which you make a recording can be recorded
correctly.
The following procedure can also be used to correct the date and time you have already set.
1 Turn the DVD Video Camera on.
2 Press the MENU button.
The menu screen will
appear.
3 Press the f / e button
to choose “Date Setup”
and then press the c
button to choose “Date
Set”.
4 Press the c button.
The figure for the month
will be selected.
[The digit that is
highlighted first depends
on the date display format
(set up in Date Mode): The digit on the left end of
the date display will be highlighted first.]
Note:
After highlighting the month, press the f / e
button to change the month. If you press the A button
after changing the month, the screen for verifying the set
date will appear instead of the screen for setting day,
year or time.
5 Press the f / e button to change the month.
Press the d / c button to move the highlight
to the day of the month, then repeat step 5 to set
the current date and time.
Note:
To stop date/time setting midway, press the C button.
6 After setting the current
date and time, press the
A button.
The screen for verifying
the set date will appear.
7 If the displayed date and time are correct, use the
control buttons to choose “YES”, and then press
the A button.
The date and time will be set, and the DVD Video
Camera will enter recording pause mode.
Choosing “NO” will restore the menu screen.
Important Note:
This DVD Video Camera incorporates a rechargeable
battery to store the date and time in memory. If this
built-in battery is exhausted, the date and time will be
reset. To prevent this, connect the AC adaptor to DVD
Video Camera every 3 months, and leave it to charge
for at least 24 hours with the DVD Video Camera turned
off: The built-in battery will be charged.
Press f/ e/d/c buttons
to select, and then press
A to
activate.
Camera Functions Setup
On
Auto
RAM
Program AE
White Bal.
Dig.Zoom
EIS
ENTER RETURN
40x
Auto
Wind Cut
Off
:
:
:
:
:
RAM
Date Set
ENTER RETURN
JAN 1 2005
Date Setup
Date Mode
12:00AM
RAM
Date Set
ENTER RETURN
JAN 1 2005
Date Mode
Date Setup
12:00AM
ENTER
RAM
SEP 30 2005 8:00AM
Date set up?
YES NO
Date Set
VDR-M95M75M55M53PP.book Page 40 Tuesday, March 29, 2005 2:19 PM