Filter
Top Products
Working with Configurations 44
SmartNode 10200 Series User Manual 3 • Initial Setup and Web Management
Activating the Configuration
Changes made to the configuration of the Smart Media units are stored on the OAM&P Configuration and
Logging database. In order for changes to be used by the system, they must first be activated. This is done at
the system level and accessed from the Navigation panel.
Note
To activate a configuration, you must be the Root user or have a user access
level of 0.
1. Select Systems from the navigation panel.
Figure 34. Global > Systems
2. Click Edit next to the system you wish to activate,in order to access the System Configuration screen.
Figure 35. System List
3. Activate the configuration. Enter a name for the system. Under Activate Configuration: Select a Config-
uration on which to run the system. Click Activate.
Note
Make certain that Lock Active Configuration box (located at the top of the
page) is 'unchecked.’ Failure to do so will prevent the configuration from
being saved.
Figure 36. Name and Activate Configuration