Filter
Top Products
Working with Configurations 47
SmartNode 10200 Series User Manual 3 • Initial Setup and Web Management
Configuring IP Interfaces
The IP interface of the VoIP0 and VoIP1 ports can be configured by setting the following:
• IP Address
• Netmask
• Gateway
To configure a VoIP0 or VoIP1 port:
1. Select IP Interfaces from the navigation pane:
Figure 41. Menu > IP Interfaces
2. Click Edit from the IP Interfaces Information panel.
Figure 42. IP Interface List
3. Configure the IP port:
– Indicate whether or not to use DHCP on this port
–Enter an IP address
–Enter a Netmask
–Enter a gateway address
–Click Save